Atheros AR9565

[Adrian Chadd]

Right. It sounds like it's not associated.

Try wlandebug +assoc and then run wpa_supplicant


-a


On 8 April 2014 12:21, tzoi516 <tzoi516 at gmail.com> wrote:
> Sorry for another email, the errors are sporadic. I'm trying to find the
> ioctl errors that I get on shutdown.
> These are after logging in:
>
> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
> dhclient[1001]: send_packet: Invalid argument
> dhclient[1001]: send_packet: No buffer space available
> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
> dhclient[1001]: send_packet: No buffer space available
> dhclient[1001]: send_packet: Invalid argument
> dhclient[1001]: send_packet: Network is down
>
> Mike
>
> On 04/08/14 14:38, Adrian Chadd wrote:
>> Ah. Can you post the buffer errors you're seeing?
>>
>>
>> -a
>>
>>
>> On 8 April 2014 11:37, tzoi516 <tzoi516 at gmail.com> wrote:
>>> On 04/08/14 14:23, Adrian Chadd wrote:
>>>> It should work fine on -10 and HEAD. Is it not working fine?
>>>>
>>>>
>>>> -a
>>>>
>>>>
>>>> On 8 April 2014 09:12, tzoi516 <tzoi516 at gmail.com> wrote:
>>>>> I have a Toshiba Satellite S55-A5169
>>>>> This specific one:
>>>>> http://www.bhphotovideo.com/c/product/1024074-REG/toshiba_pskk6u_08c08t_s55_i7_4700mq_12gb_1tb_windows_8_1_15_6_silver.html)
>>>>>
>>>>> It has the Atheros combo Wi-Fi/NIC, and the Wi-Fi uses the AR9565. For
>>>>> it to work I have to change the SATA Controller Mode in the BIOS from
>>>>> "AHCI" to "Compatibility". I don't know if this information helps, and
>>>>> it's the only AHCI setting I can tweak.
>>>>>
>>>>> Mike
>>>>> _______________________________________________
>>>>> freebsd-wireless at freebsd.org mailing list
>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
>>> With SATA controller mode set to Compatibility then it works, but a
>>> little wonky at startup - sometimes I'll have to run wpa_supplicant -i
>>> wlan0 -c /etc/wpa_supplicant.conf. Infrequently a buffer error appears.
>>> With SATA controller mode set to AHCI then I can ifconfig wlan0 list
>>> scan and see available networks but I can't connect to any except for
>>> unprotected networks.
>>>
>>> I'm currently running FreeBSD 10.0-STABLE
>>>
>>> Mike
>