Atheros AR9565

[tzoi516]

dhclient[1014]: send_packet: No buffer space available - is one of them,
the other has occurred during portmaster installs.

I have two FreeBSD laptops side-by-side with the same settings to the
same router and the Intel (iwn0, with FreeBSD 10.0-RELEASE) isn't giving
me any errors.

Mike

On 04/08/14 14:38, Adrian Chadd wrote:
> Ah. Can you post the buffer errors you're seeing?
>
>
> -a
>
>
> On 8 April 2014 11:37, tzoi516 <tzoi516 at gmail.com> wrote:
>> On 04/08/14 14:23, Adrian Chadd wrote:
>>> It should work fine on -10 and HEAD. Is it not working fine?
>>>
>>>
>>> -a
>>>
>>>
>>> On 8 April 2014 09:12, tzoi516 <tzoi516 at gmail.com> wrote:
>>>> I have a Toshiba Satellite S55-A5169
>>>> This specific one:
>>>> http://www.bhphotovideo.com/c/product/1024074-REG/toshiba_pskk6u_08c08t_s55_i7_4700mq_12gb_1tb_windows_8_1_15_6_silver.html)
>>>>
>>>> It has the Atheros combo Wi-Fi/NIC, and the Wi-Fi uses the AR9565. For
>>>> it to work I have to change the SATA Controller Mode in the BIOS from
>>>> "AHCI" to "Compatibility". I don't know if this information helps, and
>>>> it's the only AHCI setting I can tweak.
>>>>
>>>> Mike
>>>> _______________________________________________
>>>> freebsd-wireless at freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
>> With SATA controller mode set to Compatibility then it works, but a
>> little wonky at startup - sometimes I'll have to run wpa_supplicant -i
>> wlan0 -c /etc/wpa_supplicant.conf. Infrequently a buffer error appears.
>> With SATA controller mode set to AHCI then I can ifconfig wlan0 list
>> scan and see available networks but I can't connect to any except for
>> unprotected networks.
>>
>> I'm currently running FreeBSD 10.0-STABLE
>>
>> Mike