Odd issue with ath and 2 IPs on interface at boot

[Adrian Chadd]

There's bugs with how interfaces are setup and wpa_supplicant is being
called. So I think this is just fallout from that.


:(


-adrian


On 6 November 2013 15:20, Vincent Hoffman <vince at unsane.co.uk> wrote:
> Hi,
>     I'm trying to bring up a wlan interface with 2 IPs on it so I can
> NAT other devices on the wireless network.
> If I try and configure both IPs at boot via rc.conf I get no link and
> logs as follows
> Many repeating
> Nov  5 23:02:34 ostracod wpa_supplicant[676]: wlan0: Failed to initiate
> AP scan
> Nov  5 23:02:35 ostracod kernel: ath0: ath_legacy_rx_tasklet:
> sc_inreset_cnt > 0; skipping
> Nov  5 23:02:35 ostracod wpa_supplicant[676]: ioctl[SIOCS80211, op=103,
> val=0, arg_len=128]: Operation now in progress
> Nov  5 23:02:35 ostracod wpa_supplicant[676]: wlan0: Failed to initiate
> AP scan
> with the occasional
> Nov  5 23:04:51 ostracod kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0;
> bailing
> Nov  5 23:04:51 ostracod kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0;
> bailing
>
> in rc.conf I have:
>    wlans_ath0="wlan0"
>    ifconfig_wlan0="WPA inet 85.233.185.162/29 -bgscan"
>    ifconfig_wlan0_alias0="inet 10.10.10.1/24"
>
>
> If however I add just one address and then create the alias manually
> later It works fine.
>
> ath device details
>
> ath0: <Atheros 5424/2424> mem 0xfebf0000-0xfebfffff irq 16 at device 0.0
> on pci4
> ath0: AR2425 mac 14.2 RF5424 phy 7.0
> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2
>
> ath0 at pci0:4:0:0:        class=0x020000 card=0x7131144f chip=0x001c168c
> rev=0x01 hdr=0x00
>     vendor     = 'Atheros Communications Inc.'
>     device     = 'AR242x / AR542x Wireless Network Adapter (PCI-Express)'
>     class      = network
>     subclass   = ethernet
>
> OS details:
> FreeBSD ostracod.unsane.co.uk 10.0-BETA2 FreeBSD 10.0-BETA2 #71 r257498:
> Fri Nov  1 17:31:01 GMT 2013
> toor at ostracod.unsane.co.uk:/scratch/obj/usr/src/sys/OSTRACOD  amd64
>
> It seems unlikely this is expected and i'm not even sure its ath based
> but I dont have any other wireless interfaces to test with.
> Any suggestions?
> The system is in use at the moment but I can test from time to time.
>
> Vince
>
>
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"