ath not working after a motherboard and ram upgrade

[Joshua Isom]

I tried updating today to the new code, it seemed to make it worse and 
never get decent ping times.  With the code from before, it's dependent 
on boot, either it will work fine on boot or fail.

But it has to be related to the "handled npkts 0" message.  When I'm 
getting no messages, it's perfect.  The number and speed of the messages 
is the inverse of the network quality.  When it's an intermittent loss, 
it degrades a couple seconds before the messages start.

On 3/31/2013 7:06 AM, Joshua Isom wrote:
> If I drop down to one 8Gb stick, and I don't have other wifi devices
> near causing interference, I can get a reliable connection and low loss.
>   If I have 16Gb, I can get about a minute or two of decent ping times
> before it degrades to multi-second pings of the router.  Even at 8Gb,
> it's not guaranteed on boot, but rebooting does seem to fix it.  At
> 16Gb, I tried two different sticks just to see if maybe it was one bad
> chip but it didn't change it.  That means it's probably an address
> conflict, or cache size issue, right?
>
> On 3/31/2013 1:25 AM, Adrian Chadd wrote:
>> does downgrading the motherboard/ram fix it?
>>
>> You were already running 64 bit, right? What if you just boot with 2gb
>> of ram?
>>
>>
>>
>>
>> adrian
>>