AR9300

[Adrian Chadd]

Hi!

You'll need to comment out the ath, ath_hal, and ath_rate_sample
devices in your kernel.

You'll need to add:

ATH_DEBUG
AH_DEBUG
ATH_ENABLE_11N
ATH_DIAGAPI

.. AH_DEBUG / ATH_ENABLE_11N Are required for it to work; the others
are for debugging.

The build only works as a module. You'll need to rebuild your kernel
with the above options and the above devices commented out so you can
load ath and ath_pci as modules.

Then yes, kldload if_ath_pci should do the trick.



Adrian


On 21 March 2013 08:19, Mark Austin <ganthore at gmail.com> wrote:
> I'm going to help test the AR9300 code. I just checked out a complete copy
> of the HEAD sources along with the latest copy of the AR9300 from the
> erikarn git repo. I moved the source code into the correct file/folder
> location that is listed in the comments of the ath Makefile. I'm under the
> assumption that I just need to un-comment out the AR9300 blocks and rebuild
> the sources? Will this require rebuilding just the kernel or will I also
> need to rebuild the world tools?
>
> Regards,
> -Mark Austin
>
> All else is in doubt, so this is the truth that I cling to.
>
> My Website: http://www.silverdire.com
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"