Fine, OK, here's my initial AR9380/AR9485 support

[Joshua Isom]

On 3/13/2013 7:31 PM, Adrian Chadd wrote:
> On 9 March 2013 10:54, Adrian Chadd <adrian at freebsd.org> wrote:
>
>> What's tested:
>>
>> * legacy, 1x1 and 2x2 HT20/HT40, STA mode
>> * AR9380 (1x1, 2x2 - 2/5ghz)
>> * AR9485 (1x1, 2ghz only)
>
> I can now add two more NICs to this list:
>
> * AR9390 (HB116)
> * AR9462 (WB225)
>
> Thanks,
>
>
> Adrian
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
>


I've got it all compiled and booted, but the driver's not finding the 
card.  Any ideas?

> [jri:~] root# uname -a
> FreeBSD jri.homeunix.com 10.0-CURRENT FreeBSD 10.0-CURRENT #5 r248281M: Thu Mar 14 18:55:48 CDT 2013     root at jri.homeunix.com:/usr/obj/root/ATH/head/sys/ATH  amd64
> [jri:~] root# pciconf -lv # Truncated
> none3 at pci0:2:0:0:       class=0x028000 card=0x3112168c chip=0x0030168c rev=0x01 hdr=0x00
>     vendor     = 'Atheros Communications Inc.'
>     device     = 'AR9300 Wireless LAN adaptor'
>     class      = network
> [jri:~] root# diff ATH/head/sys/amd64/conf/{ATH,GENERIC}
> 27,30d26
> < options ATH_DEBUG
> < options AH_DEBUG
> < options ATH_DIAGAPI
> <
> 142c138
> < #device               cd              # CD
> ---
>> device                cd              # CD
> [jri:~] root# ifconfig
> nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>
>         ether 6c:f0:49:d5:6f:6a
>         inet 192.168.1.6 netmask 0xffffff00 broadcast 192.168.1.255
>         inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: Ethernet autoselect (1000baseT <full-duplex>)
>         status: active
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>         options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
>         inet6 ::1 prefixlen 128
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
>         inet 127.0.0.1 netmask 0xff000000
>         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> [jri:~] root# kldload if_ath
> kldload: can't load if_ath: File exists