stuck beacon hung wifi adapter AR5008
paranormal
paranormal at isgroup.com.ua
Sat Jan 26 22:27:47 UTC 2013
Antennas have been replaced two weeks ago.
Now I have only two antennas connected.
I can connect the third, but it would be a different antenna (an old
one).
On Sat, 2013-01-26 at 20:03 +0100, Marten Vijn wrote:
> On 01/26/2013 07:01 PM, paranormal wrote:
> > Hi list.
> >
> > My system is -STABLE.
> > Since 9.1 MFC, may be a few months earlier, something was happened, and
> > stuck beacon errors make my wifi ap adapter unresponsible again.
> > I have to shutdown my ap once per week.
> >
> > How to figure it out?
> >
> > ifconfig:
> > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
> > 1500
> > ether 00:1e:58:39:f8:7b
> > inet 192.168.11.1 netmask 0xfffffff0 broadcast 192.168.11.15
> > inet 192.168.11.2 netmask 0xffffffff broadcast 192.168.11.2
> > inet 192.168.11.3 netmask 0xffffffff broadcast 192.168.11.3
> > inet 192.168.11.4 netmask 0xffffffff broadcast 192.168.11.4
> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
> > status: running
> > ssid mbsd channel 3 (2422 MHz 11g ht/40+) bssid 00:1e:58:39:f8:7b
> > regdomain ETSI indoor ecm authmode OPEN privacy OFF txpower 20
> > scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 8 shortgi wme
> > burst dtimperiod 1 -dfs
> >
> >
> > There were after last adapter hung:
> >
> > 64 Jan 26 17:41:45 mbsd kernel: ath0: stuck beacon; resetting (bmiss
> > count 4)
> > 65 Jan 26 17:41:45 mbsd kernel: ath0: stuck beacon; resetting (bmiss
> > count 4)
> > 66 Jan 26 17:41:45 mbsd
> > kernel:~
> > 67 Jan 26 17:41:45 mbsd kernel: ath0: stuck beacon; resetting (bmiss
> > count 4)
> > 68 Jan 26 17:41:48 mbsd last message repeated 14
> > times
> > 69 Jan 26 17:41:48 mbsd
> > kernel:~
> > 70 Jan 26 17:41:48 mbsd kernel: ath0: stuck beacon; resetting (bmiss
> > count 4)
> > 71 Jan 26 17:42:02 mbsd last message repeated 62
>
> maybe:
>
> check you have antenna's on main + diversity, or make sure you have
> and a closing-end-connector (see documetentation of your ath card) on
> the diversity connector,
>
> and or maybe disable it in software, examples are in
>
> http://bsd.wifisoft.org/svn/projects/nek/events/ApacheCon-2012/accesspoint/Files/etc/sysctl.conf
>
> else install ath debug tools from
>
> /usr/src/tools/tools/ath
>
>
> 2ct,
> cheers Marten
>
> > times
> >
>
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freebsd.org/pipermail/freebsd-wireless/attachments/20130127/60850a3a/attachment.sig>
More information about the freebsd-wireless
mailing list