stuck beacon hung wifi adapter AR5008

[Adrian Chadd]

Hi!

Try putting it into ht20 mode.

Do you have all three antennas connected?



Adrian



Sent from my Palm Pre on AT&T
On Jan 26, 2013 10:01 AM, paranormal <paranormal at isgroup.com.ua> wrote: 

Hi list.



My system is -STABLE.

Since 9.1 MFC, may be a few months earlier, something was happened, and

stuck beacon errors make my wifi ap adapter unresponsible again.

I have to shutdown my ap once per week.



How to figure it out?



ifconfig:

wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu

1500

	ether 00:1e:58:39:f8:7b

	inet 192.168.11.1 netmask 0xfffffff0 broadcast 192.168.11.15

	inet 192.168.11.2 netmask 0xffffffff broadcast 192.168.11.2

	inet 192.168.11.3 netmask 0xffffffff broadcast 192.168.11.3

	inet 192.168.11.4 netmask 0xffffffff broadcast 192.168.11.4

	media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>

	status: running

	ssid mbsd channel 3 (2422 MHz 11g ht/40+) bssid 00:1e:58:39:f8:7b

	regdomain ETSI indoor ecm authmode OPEN privacy OFF txpower 20

	scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 8 shortgi wme

	burst dtimperiod 1 -dfs





There were after last adapter hung:



64 Jan 26 17:41:45 mbsd kernel: ath0: stuck beacon; resetting (bmiss

count 4)      

 65 Jan 26 17:41:45 mbsd kernel: ath0: stuck beacon; resetting (bmiss

count 4)      

 66 Jan 26 17:41:45 mbsd

kernel:~                                                   

 67 Jan 26 17:41:45 mbsd kernel: ath0: stuck beacon; resetting (bmiss

count 4)      

 68 Jan 26 17:41:48 mbsd last message repeated 14

times                             

 69 Jan 26 17:41:48 mbsd

kernel:~                                                   

 70 Jan 26 17:41:48 mbsd kernel: ath0: stuck beacon; resetting (bmiss

count 4)      

 71 Jan 26 17:42:02 mbsd last message repeated 62

times