[patch] if_ath_tx: change interrupt scheduling deferral

[Berislav Purgar]

On Sun, Sep 11, 2011 at 5:16 AM, Adrian Chadd <adrian at freebsd.org> wrote:

> On 11 September 2011 00:48, Berislav Purgar <bpurgar at gmail.com> wrote:
>
> > i tested new patches and can tell that works ok. i don't see any error
> > messages  in logfile for both cards (high trafic load). regarding to
> > anything i tested (HT20/40) iperf shows
>
> Sweet.
>
> > TCP ~ 9.8MB/s  UPD ~ 13MB/s  on HT/20 .
> > TCP ~ 13MB/s   UDP ~ 19.7MB/s on HT/40
> >
> > this results are when AR5416 act as iperf server and AR9280 as client, in
> > another case results are worse.
> > AR5416 works in sta and AR9280 in hostap mode.
> > that's all for now :)
>
> Yeah; things get a bit unpredictable at times. I'll do some further
> digging to try and understand why.
> I still think it's a dodgy mix of issues with periodic calibration and
> rate control.
>
> I'm still working out the kinks with my current patch. I'll post
> another one shortly for you (and others!) to try.
>
> Finally, have you seen any device timeouts? Or odd traffic hangs?
>
> Thanks,
>
>
> Adrian
>

as i mention before . no errors at any tipe ..

Beri