Bhyve help

[Brandon helsley]

The handbook only says vmm doesn't it. I got bhyve to start without virtio kernel module as well as the if_tap but with vmm modules.

I'm at this screen:please choose the appropriate terminal type for your system.common console types are: ansi, vt100, xterm, cons25w.

Console type [vt100]:

Sent from Outlook Mobile<https://aka.ms/blhgte>
________________________________
From: Aryeh Friedman <aryeh.friedman at gmail.com>
Sent: Tuesday, May 5, 2020 3:52:26 AM
To: Brandon helsley <brandon.helsley at hotmail.com>
Cc: freebsd-virtualization at freebsd.org <freebsd-virtualization at freebsd.org>; Robert Crowston <crowston at protonmail.com>
Subject: Re: Bhyve help



On Tue, May 5, 2020 at 5:21 AM Brandon helsley <brandon.helsley at hotmail.com<mailto:brandon.helsley at hotmail.com>> wrote:
I have re0 but the ip address is under wlan0 with my CenturyLink

In order to use vtnet and bridging (both required for bhyve networking) you need to load the load the virtio kernel module as well as the if_tap and vmm modules (the first one provides the host side of the virtual NIC and the second loads the hypervisor components)

Sent from Outlook Mobile<https://aka.ms/blhgte>

________________________________
From: Robert Crowston <crowston at protonmail.com<mailto:crowston at protonmail.com>>
Sent: Tuesday, May 5, 2020 3:14:43 AM
To: Brandon helsley <brandon.helsley at hotmail.com<mailto:brandon.helsley at hotmail.com>>; freebsd-virtualization at freebsd.org<mailto:freebsd-virtualization at freebsd.org> <freebsd-virtualization at freebsd.org<mailto:freebsd-virtualization at freebsd.org>>
Subject: Re: Bhyve help

What are your network interfaces called on your machine? You probably have to change igb0 in the example to em0 (an Intel card) or re0 (a Realtek card). Type “ifconfig” to list all the interfaces, and look for ones with an ip address to figure it out.

On Tue, May 5, 2020 at 10:10, Brandon helsley <brandon.helsley at hotmail.com<mailto:brandon.helsley at hotmail.com><mailto:brandon.helsley at hotmail.com<mailto:brandon.helsley at hotmail.com>>> wrote:
I'm trying to set up bhyve like the example to learn and when doing the physical interface interface get the result no such file or directory the command is:

ifconfig bridge0 addm igb0 addm tap0

"In this example, the physical interface is igb0"


Sent from Outlook Mobile<https://aka.ms/blhgte>
_______________________________________________
freebsd-virtualization at freebsd.org<mailto:freebsd-virtualization at freebsd.org> mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to "freebsd-virtualization-unsubscribe at freebsd.org<mailto:freebsd-virtualization-unsubscribe at freebsd.org>"


_______________________________________________
freebsd-virtualization at freebsd.org<mailto:freebsd-virtualization at freebsd.org> mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to "freebsd-virtualization-unsubscribe at freebsd.org<mailto:freebsd-virtualization-unsubscribe at freebsd.org>"


--
Aryeh M. Friedman, Lead Developer, http://www.PetiteCloud.org