XHCI reseting controller

[Goran Mekić]

Hello,

I have https://www.asrock.com/MB/AMD/Fatal1ty%20X370%20Professional%20Gaming/index.asp and I have the following in my log:

xhci0: Resetting controller
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
usb_alloc_device: device init 2 failed (USB_ERR_TIMEOUT, ignored)
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
uhub2: at usbus0, port 1, addr 1 (disconnected)
uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: 22 ports with 22 removable, self powered
xhci0: Resetting controller
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)

It goes on forewer. I see USB Gen2 on the board. Can that be the cause? How do I determine the cause at all? On Windows, all USB port work, I tested with USB audio interface.

Currently running 13-CURRENT, tested with 12.0-RELEASE and Ubuntu, they all have the problem except for Windows. When I run "usbconfig" it just hangs. Any tips are welcome, even those on how to disable problematic ports.

Regards,
meka
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-usb/attachments/20190326/3f7f6c1a/attachment.sig>