nut/apc values sparse after update to 11.2

[Gerrit Kühn]

Hi all,

I just upgraded a server from 11.1 to 11.2. After this, nut appears to
read only very few values from the ups attached via usbhid to the box.
With 11.1, upslog recorded all relevant values:
---
20180903 134024 100.00 226.30 46.30 [OL] 27.00 50.00
---


With 11.2, upslog only reports online and charge:

---
20180903 141918 100 NA NA [OL] NA NA
---

Any ideas how to get back the other values? upsc on the commandline does
not appear to report them anymore, either:

---
# upsc apc at localhost
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.runtime: 2460
battery.runtime.low: 120
battery.type: PbAc
battery.voltage: 54.5
battery.voltage.nominal: 48.0
device.mfr: American Power Conversion 
device.model: Smart-UPS 3000
device.serial: AS1548242019  
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/uhid0
driver.parameter.synchronous: no
driver.parameter.vendorid: 051d*
driver.version: 2.7.4
driver.version.data: APC HID 0.96
driver.version.internal: 0.41
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.firmware: UPS 09.3 / ID=18
ups.mfr: American Power Conversion 
ups.mfr.date: 2015/11/25
ups.model: Smart-UPS 3000
ups.productid: 0003
ups.serial: AS1548242019  
ups.status: OL
ups.timer.reboot: -1
ups.timer.shutdown: -1
ups.vendorid: 051d
---


I'm missing things like volate, frequency, load...



cu
  Gerrit