Support for Linksys USB3GIG ethernet adapter

[Nicolas Blais]

Yep, that worked!  The cdce driver is pretty plain option-wise but at least
it's functional.  Also tested on the BeagleBone Black and it worked fine
(and was actually faster than on the RPI2)

Other than manually running usbconfig or adding a rc.d script at boot, can
we get the Linksys USB3GIGv1 adapter to be added to the list of supported
devices by cdce?

Here's a few outputs if interested:

root at rpi2:~ # usbconfig -d 0.5 set_config 1
root at rpi2:~ # cdce0: <CDC Communications Control> on usbus0
ue1: <USB Ethernet> on cdce0
ue1: Ethernet address: 94:10:3e:b7:ad:f2

root at rpi2:~ # dhclient ue1
DHCPREQUEST on ue1 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.140 -- renewal in 43200 seconds.
root at rpi2:~ # ping 4.2.2.1
PING 4.2.2.1 (4.2.2.1): 56 data bytes
64 bytes from 4.2.2.1: icmp_seq=0 ttl=53 time=23.512 ms
64 bytes from 4.2.2.1: icmp_seq=1 ttl=53 time=22.493 ms

root at rpi2:~ # speedtest-cli
Retrieving speedtest.net configuration...
Retrieving speedtest.net server list...
Testing from Distributel Communications (X.X.X.X)...
Selecting best server based on latency...
Hosted by Belair Technologies (Pointe-Claire, QC) [120.16 km]: 68.545 ms
Testing download speed........................................
Download: 2.66 Mbit/s
Testing upload speed..................................................
Upload: 1.11 Mbit/s

root at beaglebone:~ # speedtest-cli
Retrieving speedtest.net configuration...
Retrieving speedtest.net server list...
Testing from Distributel Communications (X.X.X.X)...
Selecting best server based on latency...
Hosted by Belair Technologies (Pointe-Claire, QC) [120.16 km]: 62.09 ms
Testing download speed........................................
Download: 6.67 Mbit/s
Testing upload speed..................................................
Upload: 1.92 Mbit/s

Thanks!



On Sun, Aug 30, 2015 at 2:50 AM, Hans Petter Selasky <hps at selasky.org>
wrote:

> On 08/30/15 00:56, Nicolas Blais wrote:
>
>> Has anyone had any luck getting the Linksys USB3GIGv1 USB/Ethernet adapter
>> to work in FreeBSD? I have no issues in Linux, but it seems currently
>> unsupported on -CURRENT.  I posted on the forums in Network but was
>> forwarded here.
>>
>> On FreeBSD 11-CURRENT (armv6-RPI2):
>> ugen0.4: <Linksys> at usbus0
>>
>> root at rpi2:~ #  lsusb -d 13b1: -v
>> Bus /dev/usb Device /dev/ugen0.4: ID 13b1:0041 Linksys
>> Device Descriptor:
>>    bLength                18
>>    bDescriptorType         1
>>    bcdUSB               2.10
>>    bDeviceClass            0 (Defined at Interface level)
>>    bDeviceSubClass         0
>>    bDeviceProtocol         0
>>    bMaxPacketSize0        64
>>    idVendor           0x13b1 Linksys
>>    idProduct          0x0041
>>    bcdDevice           30.00
>>    iManufacturer           1 Linksys
>>    iProduct                2 Linksys USB3GIGV1
>> <snip>
>>
>> On Linux 3.19.8:
>> usb 4-4: new SuperSpeed USB device number 12 using xhci_hcd
>> usb 4-4: New USB device found, idVendor=13b1, idProduct=0041
>> usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
>> usb 4-4: Product: Linksys USB3GIGV1
>> usb 4-4: Manufacturer: Linksys
>> cdc_ether 4-4:2.0 eth0: register 'cdc_ether' at usb-0000:00:14.0-4, CDC
>> Ethernet Device
>>
>>
> Try:
>
> usbconfig -d X.Y set_config 1
>
> --HPS
>
>