Touchpad/trackpad not working

[Hans Petter Selasky]

On 08/12/15 12:32, Hans Petter Selasky wrote:
> On 08/12/15 11:31, Anders Bolt-Evensen wrote:
>>>
>>> When you don't see any activity, can you issue a reset of the touchpad:
>>>
>>> usbconfig -d X.Y reset
>>>
>>> while "usbdump" is running on the same device?
>>>
>>> --HPS
>>
>> Sure. 
>> usbconfig -d 0.3 reset results in the following output from the usbdump
>> command:
>
> Can you run:
>
> sysctl hw.usb.ums.debug=15
>
> Then re-run the "usbconfig -d X.Y reset" and send resulting dmesg?
>
> --HPS

Hi,

The issue might be that the BIOS is re-programming the USB device 
somehow. I see the HID descriptor has support for different modes, and 
possible the device is not re-setting its internal state upon 
re-enumeration. You can try:

usbconfig -d X.Y power_off
usbconfig -d X.Y reset

Maybe if you disable USB legacy support in the BIOS it will work.

BTW: The log you sent appears to be from a USB keyboard only device and 
not a USB mouse!

Also try:

kldload ums

Can you send output from:

usbconfig show_ifdrv

usbconfig dump_device_desc dump_curr_config_desc

When it works and when it doesn't work?

Output from dmesg is also appreciated.

--HPS