xhci problem on UEFI boot MacBookPro 11,3

[Huang Wen Hui]

verbose log with hw.usb.xhci.debug="15" in BIOS mode:
http://sw.gddsn.org.cn/freebsd/messages-bios.txt
verbose log with hw.usb.xhci.debug="15" in UEFI mode:
http://sw.gddsn.org.cn/freebsd/messages-uefi.txt


2014-09-20 20:03 GMT+08:00 Huang Wen Hui <huanghwh at gmail.com>:

> I try to UEFI boot 10-STABLE on MacBookPro 11,3, found that xhci does not
> work anymore, It works in BIOS boot.
> also try to set "hw.usb.xhci.msi=0" and hw.usb.xhci.xhci_port_route="-1",
> no lucky.
> verbose boot log can be found at :
> http://sw.gddsn.org.cn/freebsd/uefi-messages.txt
> usbconfig list show:
> ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER
> (5.0Gbps) pwr=SAVE (0mA)
>
> In BIOS boot, usbconfig list show:
>
> ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER
> (5.0Gbps) pwr=SAVE (0mA)
> ugen0.2: <BRCM20702 Hub Apple Inc.> at usbus0, cfg=0 md=HOST spd=FULL
> (12Mbps) pwr=SAVE (94mA)
> ugen0.3: <product 0x820a vendor 0x05ac> at usbus0, cfg=0 md=HOST spd=FULL
> (12Mbps) pwr=ON (0mA)
> ugen0.4: <product 0x820b vendor 0x05ac> at usbus0, cfg=0 md=HOST spd=FULL
> (12Mbps) pwr=ON (0mA)
> ugen0.5: <Bluetooth USB Host Controller Apple Inc.> at usbus0, cfg=0
> md=HOST spd=FULL (12Mbps) pwr=ON (0mA)
> ugen0.6: <Apple Internal Keyboard  Trackpad Apple Inc.> at usbus0, cfg=0
> md=HOST spd=FULL (12Mbps) pwr=ON (40mA)
> ugen0.7: <Card Reader Apple> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps)
> pwr=ON (224mA)
>
> Cheers,
> Huang Wen Hui
>