usb/177173: add buffalo's sg54hg support to rum
kit sin
ktsin at acm.org
Thu Mar 21 07:30:02 UTC 2013
The following reply was made to PR usb/177173; it has been noted by GNATS.
From: kit sin <ktsin at acm.org>
To: Hans Petter Selasky <hps at bitfrost.no>, FreeBSD-gnats-submit at FreeBSD.org
Cc:
Subject: Re: usb/177173: add buffalo's sg54hg support to rum
Date: Thu, 21 Mar 2013 15:25:33 +0800
--azLHFNyN32YCQGCU
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
sure. thanks
On Thu, Mar 21, 2013 at 08:06:43AM +0100, Hans Petter Selasky wrote:
> Hi,
>
> Can you also provide output from dmesg, and output from usbconfig next time?
>
> --HPS
--azLHFNyN32YCQGCU
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="usbconfig.txt"
ugen5.2: <BUFFALO WLI-U2-SG54HG buffalo> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (300mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x0411
idProduct = 0x00f4
bcdDevice = 0x0001
iManufacturer = 0x0001 <retrieving string failed>
iProduct = 0x0002 <retrieving string failed>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
ugen5.2: <BUFFALO WLI-U2-SG54HG buffalo> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (300mA)
Configuration index 0
bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x0035
bNumInterfaces = 0x0001
bConfigurationValue = 0x0001
iConfiguration = 0x0000 <no string>
bmAttributes = 0x0080
bMaxPower = 0x0096
Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0005
bInterfaceClass = 0x00ff
bInterfaceSubClass = 0x00ff
bInterfaceProtocol = 0x00ff
iInterface = 0x0000 <no string>
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081 <IN>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0001 <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Endpoint 2
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0002 <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Endpoint 3
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0003 <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Endpoint 4
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0004 <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
--azLHFNyN32YCQGCU
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.txt"
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0: Fri Mar 15 11:01:21 MYT 2013
ktsin at test.yahoo.com:/tmp/obj/usr/src/sys/SHUTTLE amd64
FreeBSD clang version 3.2 (tags/RELEASE_32/final 170710) 20121221
CPU: AMD Phenom(tm) II X6 1065T Processor (2900.06-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100fa0 Family = 0x10 Model = 0xa Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 7727681536 (7369 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <111710 APIC1052>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130214/tbfadt-626)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfe00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5418> mem 0xfeaf0000-0xfeafffff irq 18 at device 0.0 on pci2
ath0: [HT] enabling HT modes
ath0: [HT] RTS aggregates limited to 8 KiB
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR5418 mac 12.10 RF5133 phy 8.1
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mskc0: <Marvell Yukon 88E8057 Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebfc000-0xfebfffff irq 18 at device 0.0 on pci3
msk0: <Marvell Technology Group Ltd. Yukon Ultra 2 Id 0xba Rev 0x00> on mskc0
msk0: Ethernet address: 80:ee:73:09:d1:73
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
ahci0: <ATI IXP700 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe7ffc00-0xfe7fffff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0
usbus0 on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0
usbus1 on ohci1
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff800-0xfe7ff8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0
usbus3 on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe7f7000-0xfe7f7fff irq 18 at device 19.1 on pci0
usbus4 on ohci3
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff400-0xfe7ff4ff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
hdac0: <ATI SB600 HDA Controller> mem 0xfe7f0000-0xfe7f3fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7f6000-0xfe7f6fff irq 18 at device 20.5 on pci0
usbus6 on ohci4
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
amdsbwd0: <AMD SB600/SB7xx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa0
pcm1: <Realtek ALC662 (Rear Digital)> at nid 30 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen6.1: <ATI> at usbus6
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen5.1: <ATI> at usbus5
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <ATI> at usbus4
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <ATI> at usbus2
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <ATI> at usbus1
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <ATI> at usbus0
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3500630AS 3.AAK> ATA-7 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST32000542AS CC35> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1450027841 Hz quality 800
uhub0: 2 ports with 2 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub6: 3 ports with 3 removable, self powered
uhub5: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
Root mount waiting for: usbus5 usbus2
Root mount waiting for: usbus5 usbus2
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus5 usbus2
uhub1: 6 ports with 6 removable, self powered
ugen2.2: <AzureWave, Technologies, Inc.> at usbus2
u3g0: <AzureWave, Technologies, Inc. D-Link DWR-510, class 0/0, rev 2.00/0.00, addr 2> on usbus2
u3g0: Found 3 ports.
Root mount waiting for: usbus5 usbus2
ugen5.2: <buffalo> at usbus5
rum0: <buffalo BUFFALO WLI-U2-SG54HG, class 0/0, rev 2.00/0.01, addr 2> on usbus5
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
Trying to mount root from ufs:/dev/ada0s2a [rw]...
WARNING: / was not properly dismounted
ugen1.2: <vendor 0x15d9> at usbus1
ums0: <vendor 0x15d9 USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=1
wlan0: Ethernet address: 00:21:63:a4:43:08
vboxdrv: fAsync=0 offMin=0x6bd offMax=0xb04c
--azLHFNyN32YCQGCU--
More information about the freebsd-usb
mailing list