regression: if_rue device doesn't attach on HEAD

[Eitan Adler]

On 4 January 2013 17:01, Hans Petter Selasky <hselasky at c2i.net> wrote:
> On Friday 04 January 2013 22:50:38 Eitan Adler wrote:
>> On 4 January 2013 16:41, Hans Petter Selasky <hselasky at c2i.net> wrote:
>> > This typically means set address failed, which in the XHCI is done in
>> > "HW". I'll look into if I find some time. Not sure what we can do about
>> > it.
>>
>
> Hi,
>
>> As I mentioned - it works in 9.1 so *something* regressed.
>
> The only which I can think of which caused this is the recently added ETRON
> patches. You can look in the xhci.c revision history and revert from the top?
> There aren't that many patches made in that area.

I tested in stable/9 and it is broken in stable too.  This does not
have the relevant patch applied I think.

>> > You can try set first set config 255 and the config 0 on the parent HUB
>> > of this device using usbconfig.
>>
>> I'm not sure what you mean here.  What command should I run?
>
> usbconfig -d X.1 set_config 255
> usbconfig -d X.1 set_config 0

done. It did not help.


-- 
Eitan Adler