regression: if_rue device doesn't attach on HEAD

[Hans Petter Selasky]

On Friday 04 January 2013 22:31:31 Eitan Adler wrote:
> On 4 January 2013 03:21, Hans Petter Selasky <hselasky at c2i.net> wrote:
> > Did you kldload if_rue?
> 
> Yes.  This did nothing to help.
> 
> > Did you enable devd?
> 
> Yes, this was already enabled.
> 
> Use(full|less) debug info:
> 
> I now see xhci_do_command: Command timeout!
> device init 2 failed USB_ERR_TIMEOUT
> 
> which I did not see before in dmesg.

Hi,

This typically means set address failed, which in the XHCI is done in "HW". 
I'll look into if I find some time. Not sure what we can do about it.
You can try set first set config 255 and the config 0 on the parent HUB of 
this device using usbconfig.

--HPS