argyllcms and usb (0.1 and 1.0)
Hans Petter Selasky
hselasky at c2i.net
Wed Feb 20 17:03:01 UTC 2013
On Wednesday 20 February 2013 10:11:10 Boris Samorodov wrote:
> Hello, All!
>
> I try to build argyllcms (http://www.argyllcms.com/) at FreeBSD:
> -----
> % uname -a
> FreeBSD bsam.wart.ru 10.0-CURRENT FreeBSD 10.0-CURRENT #8 r246714: Tue
> Feb 12 22:26:27 SAMT 2013
> bsam at bsam.wart.ru:/usr/obj/usr/src/sys/BB64X amd64
> -----
>
> The program uses USB-0.1 and USB-1.0. There is a remark at sources
> that since libusb1 does not support FreeBSD, usb-0.1 is used.
>
> When compiling I get the following error:
> -----
> spectro/usbio.c:741:17: error: use of undeclared identifier 'dev'; did
> you mean 'div'?
> descriptor = dev->descriptor; /* Copy */
> ^~~
> div
> /usr/include/stdlib.h:91:8: note: 'div' declared here
> div_t div(int, int) __pure2;
> ^
> spectro/usbio.c:741:20: error: member reference base type 'div_t (int,
> int)' is not a structure or union
> descriptor = dev->descriptor; /* Copy */
> ~~~^ ~~~~~~~~~~
> 5 warnings and 2 errors generated.
>
> cc -c -o spectro/usbio.o -DUNIX -D_THREAD_SAFE -pipe -O2
> -DARGYLLCMS -Ispectro -Ih -Inumlib -Iicc -Icgats -Irspl -Ixicc -Igamut
> -Ispectro -Iplot -Ilibusb -Iucmm -I/usr/local/include spectro/usbio.c
> -----
>
> Relevant (imho) parts from the source file:
> -----
> [...]
> #ifdef USE_LIBUSB1
> # include "libusb.h"
> #else
> # include "usb.h"
> #endif
> [...]
> /* Get a copy of the device descriptor so we can
> see device params */
> #ifdef USE_LIBUSB1
> if (libusb_get_device_descriptor(p->ppath->dev,
> &descriptor) != LIBUSB_SUCCESS)
> error("Get device descriptor on USB port
> '%s' failed with %d (%s)",p->ppath->path,rv,libusb_strerror(rv));
> #else
> descriptor = dev->descriptor; /* Copy */
> #endif
> -----
>
> GCC version of the error message:
> -----
> spectro/usbio.c: In function 'usb_open_port':
> spectro/usbio.c:741: error: 'dev' undeclared (first use in this function)
> spectro/usbio.c:741: error: (Each undeclared identifier is reported only
> once
> spectro/usbio.c:741: error: for each function it appears in.)
> -----
>
> Seems (from my very inexperienced in USB POV) that the program
> wants libusb-0.1 but gets libusb-2.0... So I'm stuck here.
>
> Questons.
> 1. Should I use some additional flags to build sources using libusb-0.1?
> 2. Is a note about FreeBSD about libusb1 is stale and lubusb1 is
> supported? Sould I use some flags to use libusb1?
>
> Any help is appreciated. Thanks!
Hi,
USE_LIBUSB1 should be set, and -lusb must be used as linker flag, not -
lusb-1.0 like under linux.
In FreeBSD -lusb is a multi-API library, including v0.1, v1.0 and v2.0. Header
files are in /usr/include
-HPS
More information about the freebsd-usb
mailing list