usb/153703: My USB keyboard does not use in 8-STABLE

Wed Jan 5 13:30:17 UTC 2011

>Number:         153703
>Category:       usb
>Synopsis:       My USB keyboard does not use in 8-STABLE
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-usb
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Jan 05 13:30:17 UTC 2011
>Closed-Date:
>Last-Modified:
>Originator:     Tatsuki Makino
>Release:        FreeBSD 8.2-PRERELEASE i386
>Organization:
&#29287;&#37326;&#12288;&#27193;
>Environment:
FreeBSD T2.test 8.2-PRERELEASE FreeBSD 8.2-PRERELEASE #0: Wed Jan  5 07:55:30 UTC 2011     root at T2.test:/usr/obj/usr/src/sys/GENERIC  i386
>Description:
My USB keyboard does not use in 8.2-PRERELEASE and 8.1-RELEASE.

My USB keyborad is Japanese 109 keyboard recognized as `Fujitsu Fujitsu RF Comfort Keyboard / Mouse II, class 0/0, rev 1.10/2.00'. It is embedded in display VL-17WDX2G. (http:/ /www.fmworld.net/product/hard/dp0105/c_series.html)

It is working boot0, boot1 and boot2 phase. But when kernel was booted, it respond only &#12511;&#30000; Windows(R) key.
>How-To-Repeat:
Connecting VL-17WDX2G's USB line to motherboard's USB terminal.
I tried the combination of Fujitsu C7/100WLT authorized and the combination with asus n4l-vm dh.

boot0: I use BootMgr.
Boot slice could be chosen by F1 key.

boot2:
Timer could be stopped by space key.
Single user mode could be chosen by 4 key.
Default boot could be chosen by 1 or Enter key.

Kernel was loaded and was booted:
Garbage character could be inputted by Win key.

Logged in user used /bin/csh by using another USB keyboard:
Mother board was beeped when push Win key.
>Fix:
I don't know.
I need divine guidance.
I have attached dmesg.

Patch attached with submission follows:

Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-PRERELEASE #0: Wed Jan  5 07:55:30 UTC 2011
    root at T2.test:/usr/obj/usr/src/sys/GENERIC i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz (2000.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Family = 6  Model = f  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2086572032 (1989 MB)
ACPI APIC Table: <A_M_I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0x20, should be 0x13 (20101013/tbutils-354)
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xfebfc000-0xfebfffff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfe9fe000-0xfe9fffff irq 18 at device 0.0 on pci3
atapci0: [ITHREAD]
atapci1: <AHCI SATA controller> on atapci0
atapci1: [ITHREAD]
atapci1: AHCI v1.00 controller with 2 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 0> on atapci0
ata4: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 7.1.8> port 0xcc00-0xcc1f mem 0xfe8e0000-0xfe8fffff irq 19 at device 0.0 on pci2
em0: Using an MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:17:31:9a:d1:a9
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xe480-0xe49f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xe800-0xe81f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xe880-0xe89f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfebfbc00-0xfebfbfff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfeaff800-0xfeafffff,0xfeaf8000-0xfeafbfff irq 21 at device 3.0 on pci5
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:ab:03:18
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7db24000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:ab:03:18
fwe0: Ethernet address: 02:11:d8:ab:03:18
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:11:d8:00:00:ab:03:18 @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
ath0: <Atheros 5212> mem 0xfeae0000-0xfeaeffff irq 21 at device 9.0 on pci5
ath0: [ITHREAD]
ath0: AR5212 mac 5.9 RF5112 phy 4.3
pci5: <multimedia> at device 10.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH7M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci2
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci2
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xd0000-0xd2fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 476940MB <Hitachi HTS545050B9A300 PB4OC64G> at ata0-master UDMA100 SATA
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ad1: 305245MB <Hitachi HDT725032VLA360 V54OA73A> at ata0-slave UDMA100 SATA
ad2: 57259MB <MAXTOR 6L060L3 A93.0500> at ata1-master UDMA133
hdac0: HDA Codec #0: Realtek ALC882
pcm0: <HDA Realtek ALC882 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC882 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC882 PCM #2 Digital> at cad 0 nid 1 on hdac0
SMP: AP CPU #1 Launched!
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
GEOM: ad1s2: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad2s1: geometry does not match label (255h,63s != 16h,63s).
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Trying to mount root from ufs:/dev/ad0s1a
ugen0.2: <vendor 0x0451> at usbus0
uhub5: <General Purpose USB Hub> on usbus0
uhub5: 3 ports with 1 removable, self powered
ugen0.3: <Fujitsu> at usbus0
ukbd0: <Fujitsu Fujitsu RF Comfort Keyboard / Mouse II, class 0/0, rev 1.10/2.00, addr 3> on usbus0
kbd2 at ukbd0
ums0: <Fujitsu Fujitsu RF Comfort Keyboard / Mouse II, class 0/0, rev 1.10/2.00, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen0.4: <Fujitsu> at usbus0
uhid0: <Fujitsu Message Board, class 0/0, rev 1.10/1.00, addr 4> on usbus0
ugen0.5: <vendor 0x099a> at usbus0
ukbd1: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/1.00, addr 5> on usbus0
kbd3 at ukbd1
uhid1: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/1.00, addr 5> on usbus0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded

>Release-Note:
>Audit-Trail:
>Unformatted: