usb/146840: [hang] FreeBSD 7.2 / 7.3 / 8.0 hang at startup after ehci0 detected (CD Loader 1.2) // same as closed-unsolved [usb/108509]

[Андрей Ковальчук]

2010/6/6 Hans Petter Selasky <hselasky at c2i.net>:
> On Sunday 06 June 2010 21:23:06 Андрей Ковальчук wrote:
>> 2010/6/5 Hans Petter Selasky <hselasky at c2i.net>:
>> > On Saturday 05 June 2010 14:20:07 Андрей Ковальчук wrote:
>> >> The following reply was made to PR usb/146840; it has been noted by
>> >> GNATS.
>> >>
>> >> From: =?UTF-8?B?0JDQvdC00YDQtdC5INCa0L7QstCw0LvRjNGH0YPQug==?=
>> >>  <andrew at anviko.com.ua> To: bug-followup at FreeBSD.org,
>> >> FreeBSD at anviko.com.ua Cc:
>> >> Subject: Re: usb/146840: [hang] FreeBSD 7.2 / 7.3 / 8.0 hang at startup
>> >>  after ehci0 detected (CD Loader 1.2) // same as closed-unsolved
>> >>  [usb/108509] Date: Sat, 5 Jun 2010 14:45:57 +0300
>> >>
>> >>  I try disabling EHCI and USB in loader (because Compaq BIOS dont have
>> >>  settings for disabling USB controller):
>> >>
>> >>  hint.ehci.0.disabled=1
>> >>  hint.usb.0.disabled=1
>> >
>> > A hang can indicate an IRQ issue.
>> >
>> > Try to enable USB debugging:
>> >
>> > sysctl hw.usb.ehci.debug=15
>
> Then try "set" instead of "sysctl".

No changes are. After
ehci0: [GIANT LOCKED]
ehci0: [ITHREAD]
system hang.
when system load - no additional information is not show

>
>>
>> in CD loader 1.2 'sysctl' not exists
>>
>> > --HPS
>>
>



-- 
С уважением,
 Ковальчук Андрей.
 ООО "АнВиКо АйТи"