ZTE USB 3g stick

[Mike Tancsa]

At 07:49 AM 8/28/2010, Matthew Luckie wrote:
ugen6.2: <ZTE,Incorporated> at usbus6
>umass0: <ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev 
>2.00/0.00, addr 2> on usbus6
>cd1 at umass-sim0 bus 0 scbus2 target 0 lun 0
>cd1: <ZTE USB SCSI CD-ROM 2.31> Removable CD-ROM SCSI-2 device
>cd1: 40.000MB/s transfers
>cd1: cd present [31484 x 2048 byte records]
>
>Sadly no /dev/cuaU* entries.  After the set_config, I have new /dev 
>entries for cd1, iso9660, pass1, and of course ugen6.2.

What if you do a
camcontrol eject pass0 (or pass1 if its 1)

I have also found the odd ZTE stick where post power up, I need to do 
a reset for some odd reason.  Perhaps a firmware issue with some ZTE 
sticks ? not sure

usbconfig -d 6.2 reset
or
usbconfig -d 6.2 power_off
usbconfig -d 6.2 power_on



         ---Mike




--------------------------------------------------------------------
Mike Tancsa,                                      tel +1 519 651 3400
Sentex Communications,                            mike at sentex.net
Providing Internet since 1994                    www.sentex.net
Cambridge, Ontario Canada                         www.sentex.net/mike