support for logitech mx610 mouse
Hans Petter Selasky
hselasky at c2i.net
Sat Mar 14 05:34:24 PDT 2009
On Saturday 14 March 2009, Artyom Mirgorodsky wrote:
> > The format is:
> >
> > /dev/usb/X.Y.Z
> >
> > X is USB BUS
> > Y is device index
> > Z is endpoint & 0xF
> >
> > The the usbconfig's dump_curr_config_desc which endpoint belongs to your
> > driver. Also see the show_ifdrv command to see which driver is connected
> > to which interface.
>
> I understand that. But I can't read from this devices does.
>
> usbconfig show_ifdrv
> ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
> pwr=ON ugen0.1.0: uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00,
> addr 1> ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=ON ugen1.1.0: uhub1: <nVidia EHCI root HUB, class 9/0, rev
> 2.00/1.00, addr 1> ugen0.2: <USB Receiver Logitech> at usbus0, cfg=0
> md=HOST spd=LOW (1.5Mbps) pwr=ON ugen0.2.0: ums0: <Logitech USB Receiver,
> class 0/0, rev 2.00/42.00, addr 2>
>
>
> usbconfig dump_curr_config_desc
> ugen0.2: <USB Receiver Logitech> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps)
> pwr= ON
>
>
> Configuration index 0
>
> bLength = 0x0009
> bDescriptorType = 0x0002
> wTotalLength = 0x003b
> bNumInterfaces = 0x0002
> bConfigurationValue = 0x0001
> iConfiguration = 0x0004 <RR42.00_B0032>
> bmAttributes = 0x00a0
> bMaxPower = 0x0031
>
> Interface 0
> bLength = 0x0009
> bDescriptorType = 0x0004
> bInterfaceNumber = 0x0000
> bAlternateSetting = 0x0000
> bNumEndpoints = 0x0001
> bInterfaceClass = 0x0003
> bInterfaceSubClass = 0x0001
> bInterfaceProtocol = 0x0002
> iInterface = 0x0000 <no string>
>
> Additional Descriptor
>
> bLength = 0x09
> bDescriptorType = 0x21
> bDescriptorSubType = 0x11
> RAW dump:
> 0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0x43,
> 0x08 | 0x00
>
> Endpoint 0
> bLength = 0x0007
> bDescriptorType = 0x0005
> bEndpointAddress = 0x0081
> bmAttributes = 0x0003
> wMaxPacketSize = 0x0008
> bInterval = 0x000a
> bRefresh = 0x0000
> bSynchAddress = 0x0000
>
>
> Interface 1
> bLength = 0x0009
> bDescriptorType = 0x0004
> bInterfaceNumber = 0x0001
> bAlternateSetting = 0x0000
> bNumEndpoints = 0x0001
> bInterfaceClass = 0x0003
> bInterfaceSubClass = 0x0000
> bInterfaceProtocol = 0x0000
> iInterface = 0x0000 <no string>
>
> Additional Descriptor
>
> bLength = 0x09
> bDescriptorType = 0x21
> bDescriptorSubType = 0x11
> RAW dump:
> 0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0x4f,
> 0x08 | 0x00
>
> Endpoint 0
> bLength = 0x0007
> bDescriptorType = 0x0005
> bEndpointAddress = 0x0082
> bmAttributes = 0x0003
> wMaxPacketSize = 0x0008
> bInterval = 0x000a
> bRefresh = 0x0000
> bSynchAddress = 0x0000
>
> I'm unload ums and reload uhid then try read again:
> uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 2> on usbus0
> uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 2> on usbus0
>
> cat /dev/usb/0.2.1
> ^C
> cat /dev/usb/0.2.2
> ^C
>
> cat /dev/uhid0
> 0OЕЩ_ЭoЭoЩЧoЪoЧ@ЪOЧ_Ш_ЧOШOЬ?У/щКОЪХЪЪPЪ═ЪпЪЮЪПЪюЪ ЮЪЪ
> P ``pП`P@ ЪЪЪОЪЪъЪЪЪЪ P
> Ъ/Ч?Щ?ЭOРЬOЖ?У/ТУЖВЫЗШЪЪПЪЮЪпЪпЪюЪпЪ╟Ъ═ЪюЪюЪ╟Ъ═Ъ cat /dev/uhid1
> ^C
>
> Only mouse moving produce any data from uhid.
Can you get this data dumped into HEX ?
--HPS
More information about the freebsd-usb
mailing list