Ikari laser mouse stopped working from r193084 to r194478
agh at coolrhaug.com
agh at coolrhaug.com
Fri Jun 19 09:57:02 UTC 2009
[Please CC when replying]
Hello,
Last year I bought a new laser mouse (See
http://lists.freebsd.org/pipermail/freebsd-stable/2008-December/047160.html).
It failed to work in -STABLE so I updated to -CURRENT, it still didn't
function. However a few months later I noticed after an update that it
started working. I've been following -CURRENT since then, but
recently, after svn'ing from r193084 to r194478 my mouse no longer
works.
Following is the dmesg:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0 r194478: Fri Jun 19 17:01:31 WST 2009
agh at madcat:/usr/obj/usr/src/sys/MADCAT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz (2999.97-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 2613334016 (2492 MB)
MPTable: <DP45SG INTEL>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem
0xc2000000-0xc2ffffff,0xa0000000-0xbfffffff,0xc0000000-0xc1ffffff irq
16 at device 0.0 on pci1
nvidia0: <GeForce 8600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
em0: <Intel(R) PRO/1000 Network Connection 6.9.9> port 0xf100-0xf11f
mem 0xc3200000-0xc321ffff,0xc3224000-0xc3224fff irq 20 at device 25.0
on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1c:c0:8c:09:75
uhci0: <UHCI (generic) USB controller> port 0xf0e0-0xf0ff irq 16 at
device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f30
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0xf0c0-0xf0df irq 21 at
device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f30
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0xf0a0-0xf0bf irq 18 at
device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f30
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc3225c00-0xc3225fff
irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: waiting for BIOS to give up control
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
hdac0: <Intel 82801J High Definition Audio Controller> mem
0xc3220000-0xc3223fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090614_0135
hdac0: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0xf080-0xf09f irq 23 at
device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f30
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 19 at
device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x0f30
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0xf040-0xf05f irq 18 at
device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x0f30
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc3225800-0xc3225bff
irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fwohci0: <Lucent FW322/323> mem 0xc3100000-0xc3100fff irq 19 at device
0.0 on pci2
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:90:27:00:02:2b:34:b9
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:90:27:00:02:2b:34:b9 @ 0xfffe00000000,
S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x144c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:2b:34:b9
fwe0: Ethernet address: 02:90:27:2b:34:b9
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1,
CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port
0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf020-0xf03f
mem 0xc3225000-0xc32257ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092106000921
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1 on motherboard
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092106000921
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2 on motherboard
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092106000921
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3 on motherboard
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092106000921
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcf800-0xd07ff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: [FILTER]
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x843 offMax=0xa44
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad4: 476940MB <SAMSUNG HD501LJ CR100-13> at ata2-master SATA300
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
acd0: DVDR <ASUS DRW-20B1LT/1.00> at ata3-master SATA150
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
GEOM_JOURNAL: Journal 3711606534: ad4s1d contains data.
GEOM_JOURNAL: Journal 3711606534: ad4s1e contains journal.
GEOM_JOURNAL: Journal ad4s1d clean.
GEOM_JOURNAL: Journal 2744463137: ad4s1f contains journal.
acd1: DVDR <PLEXTOR DVDR PX-716A/1.07> at ata6-master SATA150
GEOM_JOURNAL: Journal 2744463137: ad4s1g contains data.
GEOM_JOURNAL: Journal ad4s1g clean.
ad14: 114473MB <Seagate ST3120026AS 3.05> at ata7-master SATA150
hdac0: HDA Codec #2: IDT 92HD73E1
pcm0: <HDA IDT 92HD73E1 PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm1: <HDA IDT 92HD73E1 PCM #1 Analog> at cad 2 nid 1 on hdac0
pcm2: <HDA IDT 92HD73E1 PCM #2 Digital> at cad 2 nid 1 on hdac0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): CAM Status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI Status: Check Condition
(probe0:ata1:0:0:0): NOT READY asc:3a,1
(probe0:ata1:0:0:0): Medium not present - tray closed
(probe0:ata1:0:0:0): Unretryable error
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
cd0 at ata1 bus 0 target 0 lun 0
cd0: <ASUS DRW-20B1LT 1.00> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present - tray closed
cd1 at ata2 bus 0 target 0 lun 0
cd1: <PLEXTOR DVDR PX-716A 1.07> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not
present - tray closed
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
GEOM: ad14s1: geometry does not match label (255h,63s != 16h,63s).
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/label/rt_madcat
ugen0.2: <DATACOMP> at usbus0
ukbd0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus0
kbd2 at ukbd0
ums0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus0
ugen2.2: <ALCOR> at usbus2
uhub8: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus2
uhub8: 4 ports with 4 removable, self powered
ugen2.3: <SteelSeries ApS> at usbus2
ukbd1: <SteelSeries ApS Ikari Laser, class 0/0, rev 2.00/1.00, addr 3>
on usbus2
kbd3 at ukbd1
em0: link state changed to UP
And here are some usbconfig dumps:
# usbconfig -u 0 -a 2 dump_device_desc
ugen0.2: <SteelSDATA DATACOMP> at usbus0, cfg=0 md=HOST spd=LOW
(1.5Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0110
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x04b4
idProduct = 0x0101
bcdDevice = 0x0001
iManufacturer = 0x0001 <DATACOMP>
iProduct = 0x0002 <SteelSDATA>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
# usbconfig -u 2 -a 2 dump_device_desc
ugen2.2: <Generic USB Hub ALCOR> at usbus2, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=SAVE
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0110
bDeviceClass = 0x0009
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x058f
idProduct = 0x9254
bcdDevice = 0x0312
iManufacturer = 0x0001 <ALCOR>
iProduct = 0x0002 <Generic USB Hub>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
# usbconfig -u 2 -a 3 dump_device_desc
ugen2.3: <Ikari Laser SteelSeries ApS> at usbus2, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x04b4
idProduct = 0x121f
bcdDevice = 0x0100
iManufacturer = 0x0001 <SteelSeries ApS>
iProduct = 0x0002 <Ikari Laser>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
The mouse connects via a hub on the USB keyboard.
Thanks
-al
More information about the freebsd-usb
mailing list