logitech vx nano mouse buttons

[Hans Petter Selasky]

On Wednesday 16 December 2009 19:38:50 jackal wrote:
> Hello,
>
> On Wednesday 16 December 2009 20:44:21 you wrote:
> > On Wednesday 16 December 2009 13:56:52 jackal wrote:
> > > Hello,
> > >
> > > I'm using logitech vx nano mouse at freebsd 8-stable.
> > > Everything works fine, except wheel left/right buttons.
> > > `cat /dev/ums0' doesn't show anything when pressing this buttons. Any
> > > other buttons works fine, including navigation buttons.
> > > Is there a way to get this buttons work?
> >
> > Hi,
> >
> > What is the output from dmesg?
> >
> > We would need the HID descriptor for your USB mouse.
> >
> > There should be some examples if you search the freebsd-usb archive on
> >  dumping the HID descriptor using usbconfig.
> >
> > --HPS
>
> ugen0.2: <Logitech> at usbus0
> ums0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 2> on usbus0
> ums0: 16 buttons and [XYZ] coordinates ID=0
> uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 2> on usbus0
>
> dell# usbconfig -u 0 -a 2 list
> ugen0.2: <USB Receiver Logitech> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
> pwr=ON
>
> dell# usbconfig -u 0 -a 2 do_request 0x81 0x06 0x2200 0 0x100
> REQUEST = <0x05 0x01 0x09 0x02 0xa1 0x01 0x09 0x01 0xa1 0x00 0x05 0x09 0x19
> 0x01 0x29 0x10 0x15 0x00 0x25 0x01 0x95 0x10 0x75 0x01 0x81 0x02 0x05 0x01
> 0x16 0x01 0x80 0x26 0xff 0x7f 0x75 0x10 0x95 0x02 0x09 0x30 0x09 0x31 0x81
> 0x06 0x15 0x81 0x25 0x7f 0x75 0x08 0x95 0x01 0x09 0x38 0x81 0x06 0x05 0x0c
> 0x0a 0x38 0x02 0x95 0x01 0x81 0x06 0xc0 0xc0><)%u&u01%u88>
>
> dell# usbconfig -u 0 -a 2 do_request 0x81 0x06 0x2200 1 0x100
> REQUEST = <0x05 0x0c 0x09 0x01 0xa1 0x01 0x85 0x03 0x75 0x10 0x95 0x02 0x15
> 0x01 0x26 0x8c 0x02 0x19 0x01 0x2a 0x8c 0x02 0x81 0x00 0xc0 0x06 0x00 0xff
> 0x09 0x01 0xa1 0x01 0x85 0x10 0x75 0x08 0x95 0x06 0x15 0x00 0x26 0xff 0x00
> 0x09 0x01 0x81 0x00 0x09 0x01 0x91 0x00 0xc0 0x06 0x00 0xff 0x09 0x02 0xa1
> 0x01 0x85 0x11 0x75 0x08 0x95 0x13 0x15 0x00 0x26 0xff 0x00 0x09 0x02 0x81
> 0x00 0x09 0x02 0x91 0x00 0xc0><u&*u&u&>
>
> I hope, usbconfig commands are correct.

Yes, the commands are correct. Does your mouse have 16 buttons?

--HPS