Huawei E169 and microSD

[Milan Obuch]

Hi,

I tested E169 with both 7.2 and 8.0, with u3g loaded it works well here. 
Download speed 256 kBps is quite good I think.

There is possibility to insert microSD into it and this one does not work.

In 7.2, microSD is not even detected (see attached log-e169-72).

In 8.0, microSD is detected, device created (in my case /dev/da1), but trying 
to use it gives

dd if=/dev/da1
dd: /dev/da1: Device not configured

error. And it is not a hardware problem, because I was able to initialize this 
card in Windows.

Also, built-in autoinstall flash presented as CD works well.

Some time ago I was able to do some tests with E170. In this case, microSD 
worked out of the box, at that time, tested only with 8.0.

Has anybody any idea, what's wrong here? Something to test?

Regards,
Milan
-------------- next part --------------
u3g_huawei_init:269: 
usb_alloc_device:1781: Found Huawei auto-install disk!
ugen1.2: <vendor 0x12d1> at usbus1
ugen1.2: <vendor 0x12d1> at usbus1 (disconnected)
uhub_reattach_port:440: could not allocate new device!
ugen1.2: <vendor 0x12d1> at usbus1
u3g0: <Data Interface> on usbus1
u3g0: Found 3 ports.
umass1: <vendor 0x12d1 HUAWEI Mobile, class 0/0, rev 1.10/0.00, addr 2> on usbus1
umass1:  SCSI over Bulk-Only; quirks = 0x0000
umass1:1:1:-1: Attached to scbus1
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI Status: Check Condition
(probe0:umass-sim1:1:0:0): NOT READY asc:3a,0
(probe0:umass-sim1:1:0:0): Medium not present
(probe0:umass-sim1:1:0:0): Unretryable error
cd0 at umass-sim1 bus 1 target 0 lun 0
cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device 
cd0: 1.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim1:1:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 
(probe0:umass-sim1:1:0:1): CAM Status: SCSI Status Error
(probe0:umass-sim1:1:0:1): SCSI Status: Check Condition
(probe0:umass-sim1:1:0:1): NOT READY asc:3a,0
(probe0:umass-sim1:1:0:1): Medium not present
(probe0:umass-sim1:1:0:1): Unretryable error
da1 at umass-sim1 bus 1 target 0 lun 1
da1: <HUAWEI SD Storage 2.31> Removable Direct Access SCSI-2 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present