HSDPA USB Modem MF626

Fri Aug 7 02:15:31 UTC 2009

Hi all,

Connect HSDPA 3G MF626 is FreeBSD8-CURRENT

gw# kldstat
Id Refs Address    Size     Name
 1   13 0xc0400000 d72ad8   kernel
 2    1 0xc1173000 4658     u3g.ko
 3    1 0xc1178000 b9b0     umass.ko
 4    1 0xc1184000 4bf4     umodem.ko

1º run 
/usr/sbin/usb_modeswitch -d 1 -v 0×19d2 -p 0×2000 -V 0×19d2 -P 0×0031

Received inquiry data (detailed identification)
-------------------------
  Vendor String: HSPA
 Product String: USB SCSI CD-ROM
Revision String: 2.31
-------------------------
Device description data (identification)
-------------------------
Manufacturer: ZTE, Incorporated
     Product: ZTE CDMA Technologies MSM
  Serial No.: not provided
-------------------------
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x01 ...
 OK, message successfully sent
-> Run lsusb to note any changes. Bye.

-----
2º dmesg

ugen2.2: <ZTE, Incorporated> at usbus2 (disconnected)
umass0: at uhub2, port 1, addr 2 (disconnected)
rl0: link state changed to UP
rl1: link state changed to UP
ugen2.2: <ZTE, Incorporated> at usbus2
umass0: <ZTE, Incorporated ZTE CDMA Technologies MSM, class 0/0, rev 2.00/0.00, addr 2> on usbus2
umass0:  8070i (ATAPI) over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <HSPA USB SCSI CD-ROM 2.31> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ugen2.2: <ZTE, Incorporated> at usbus2 (disconnected)
umass0: at uhub2, port 1, addr 2 (disconnected)
(cd0:umass-sim0:0:0:0): lost device
(cd0:umass-sim0:0:0:0): removing device entry
ugen2.2: <ZTE, Incorporated> at usbus2
u3g0: <ZTE, Incorporated ZTE CDMA Technologies MSM, class 0/0, rev 2.00/0.00, addr 2> on usbus2
u3g0: Found 3 ports.
umass0: <ZTE, Incorporated ZTE CDMA Technologies MSM, class 0/0, rev 2.00/0.00, addr 2> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
da1 at umass-sim0 bus 0 target 0 lun 0
da1: <ZTE MMC Storage 2.31> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
---
gw# usbconfig -u 2 -a 2 dump_device_desc
ugen2.2: <ZTE CDMA Technologies MSM ZTE, Incorporated> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x19d2
  idProduct = 0x0031
  bcdDevice = 0x0000
  iManufacturer = 0x0002  <ZTE, Incorporated>
  iProduct = 0x0001  <ZTE CDMA Technologies MSM>
  iSerialNumber = 0x0003  <1234567890ABCDEF>
  bNumConfigurations = 0x0001

----
3° run ppp -ddial vivo 
result

Aug  6 21:40:25 gw ppp[1131]: Phase: Using interface: tun0
Aug  6 21:40:25 gw ppp[1131]: Phase: deflink: Created in closed state
Aug  6 21:40:25 gw ppp[1131]: tun0: Command: default: set device /dev/cuaU0.0
Aug  6 21:40:25 gw ppp[1131]: tun0: Phase: PPP Started (interactive mode).
Aug  6 21:40:28 gw ppp[1131]: tun0: Command: /dev/pts/0: dial vivo
Aug  6 21:40:28 gw ppp[1131]: tun0: Command: vivo: set phone *99#
Aug  6 21:40:28 gw ppp[1131]: tun0: Command: vivo: set authname vivo
Aug  6 21:40:28 gw ppp[1131]: tun0: Command: vivo: set authkey ********
Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: bundle: Establish
Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: deflink: closed -> opening
Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: deflink: Connected!
Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: deflink: opening -> dial
Aug  6 21:40:28 gw ppp[1131]: tun0: Chat: deflink: Dial attempt 1 of 1
Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: deflink: dial -> carrier
Aug  6 21:40:29 gw ppp[1131]: tun0: Phase: deflink: /dev/cuaU0.0 doesn't support CD
Aug  6 21:40:29 gw ppp[1131]: tun0: Phase: deflink: carrier -> login
Aug  6 21:40:29 gw ppp[1131]: tun0: Phase: deflink: login -> lcp
Aug  6 21:40:33 gw ppp[1131]: tun0: Phase: Unknown protocol 0x0013 (reserved (transparency inefficient))
Aug  6 21:40:45 gw last message repeated 19312 times
Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: Disconnected!
Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: lcp -> logout
Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: logout -> hangup
Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: Disconnected!
Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: Connect time: 17 secs: 386280 octets in, 907991 octets out
Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: 8767 packets in, 19318 packets out
Aug  6 21:40:45 gw ppp[1131]: tun0: Phase:  total 76133 bytes/sec, peak 133153 bytes/sec on Thu Aug  6 21:40:45 2009
Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: hangup -> closed
Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: bundle: Dead

tun0: flags=8050<POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
        Opened by PID 977

no ip network :(

modified as described for MF626 and does not work http://www.mail-archive.com/freebsd-usb@freebsd.org/msg04956.html
diff.

has solution for this problem?
Thanks all
-----
Wesley Miranda
FreeBSD Consult
www.freebsdconsult.com.br