usb/137377: Support for Huawei E180

[Hans Petter Selasky]

On Monday 03 August 2009 08:41:17 c-s wrote:
> >Number:         137377
> >Category:       usb
> >Synopsis:       Support for Huawei E180
> >Confidential:   no
> >Severity:       non-critical
> >Priority:       low
> >Responsible:    freebsd-usb
> >State:          open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class:          change-request
> >Submitter-Id:   current-users
> >Arrival-Date:   Mon Aug 03 06:50:01 UTC 2009
> >Closed-Date:
> >Last-Modified:
> >Originator:     c-s
> >Release:        Current
> >Organization:
> >Environment:
>
> FreeBSD c-s.li 8.0-BETA2 FreeBSD 8.0-BETA2 #3: Sat Aug  1 09:26:55 CEST
> 2009     root at c-st.net:/usr/obj/usr/src/sys/GENERIC  amd64
>
> >Description:
>
> Attaching a Huawei E180 3G USB modem yields the following message:
>
> ====================
> Aug  3 08:26:06 c-st root: Unknown USB device: vendor 0x12d1 product 0x1003
> bus uhub2 Aug  3 08:26:06 c-st kernel: ugen2.5: <HUAWEI Technology> at
> usbus2 Aug  3 08:26:06 c-st kernel: umass0: <HUAWEI Technology HUAWEI
> Mobile, class 0/0, rev 2.00/0.00, addr 5> on usbus2 Aug  3 08:26:06 c-st
> kernel: umass0:  SCSI over Bulk-Only; quirks = 0x0000 Aug  3 08:26:07 c-st
> root: Unknown USB device: vendor 0x12d1 product 0x1003 bus uhub2 Aug  3
> 08:26:07 c-st kernel: umass0:1:0:-1: Attached to scbus1
> Aug  3 08:26:07 c-st kernel: umass1: <HUAWEI Technology HUAWEI Mobile,
> class 0/0, rev 2.00/0.00, addr 5> on usbus2 Aug  3 08:26:07 c-st kernel:
> umass1:  SCSI over Bulk-Only; quirks = 0x0000 Aug  3 08:26:08 c-st kernel:
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 Aug  3
> 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status
> Error Aug  3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): SCSI Status:
> Check Condition Aug  3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): NOT
> READY asc:3a,0 Aug  3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0):
> Medium not present Aug  3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0):
> Unretryable error Aug  3 08:26:08 c-st kernel: cd0 at umass-sim0 bus 0
> target 0 lun 0 ====================
>
> Note that this device is not (!) the same as the already patched Huawei
> E180v.
>

Please provide output from:

usbconfig -u XXX -a YYY dump_device_desc dump_curr_config_desc

Where XXX and YYY are the numbers after ugen.

--HPS