Modem 3G ZTE 626

[Wesley Miranda]

hi all,
I'm trying to connect my modem HSDPA USB ZTE 626
Install the FreeBSD 8.0Beta2

Download at usb_modeswitch-1.0.2.tar.bz2 
running gcc -l usb -o usb_modeswitch usb_modeswitch.c

edit it usb_modeswitch.conf 

Descoment ventor
DefaultVendor=  0x19d2
DefaultProduct= 0x2000
0x01
MessageContent="55534243123456782000000080000c85010101180101010101000000000000"
MessageContent="5553424312345678000000000000061b000000030000000000000000000000"
 
Running /usr/sbin/usb_modeswitch
Ok Modem is UP.

My other problems too:
----
Jan 12 01:34:59 idxbox kernel: ugen4.3: <ZTE, Incorporated> at usbus4 (disconnected)
Jan 12 01:34:59 idxbox kernel: umass1: at uhub1, port 2, addr 3 (disconnected)
Jan 12 01:34:59 idxbox kernel: (cd0:umass-sim1:1:0:0): lost device
Jan 12 01:34:59 idxbox kernel: (cd0:umass-sim1:1:0:0): removing device entry
Jan 12 01:35:05 idxbox root: Unknown USB device: vendor 0x19d2 product 0x0031 bus uhub1
Jan 12 01:35:05 idxbox kernel: ugen4.3: <ZTE, Incorporated> at usbus4
Jan 12 01:35:05 idxbox kernel: umass1: <ZTE, Incorporated ZTE CDMA Technologies MSM, class 0/0, rev 2.00/0.00, addr 3> on usbus4
Jan 12 01:35:05 idxbox kernel: umass1:  SCSI over Bulk-Only; quirks = 0x0000
----
running ppp -ddial vivo
other problems:
---
Jan 12 01:55:33 idxbox ppp[1349]: Phase: Using interface: tun0
Jan 12 01:55:33 idxbox ppp[1349]: Phase: deflink: Created in closed state
Jan 12 01:55:33 idxbox ppp[1349]: tun0: Command: default: set device /dev/cuau1
Jan 12 01:55:33 idxbox ppp[1349]: tun0: Command: default: set speed sync
Jan 12 01:55:33 idxbox ppp[1349]: tun0: Command: default: set dial ABORT BUSY TIMEOUT 2         ""         AT OK-AT-OK         AT+CFUN=1 OK-AT-OK         AT+CMEE=2 OK-AT-OK
    AT+CSQ OK         AT+CGDCONT=1,\"IP\",\"internet\" OK         AT+CGACT? OK-AT-OK         AT+CGATT? OK         AT+CGCLASS? OK         AT+COPS? OK         ATD*99# CONNECT
Jan 12 01:55:33 idxbox ppp[1349]: tun0: Phase: PPP Started (interactive mode).
Jan 12 01:55:50 idxbox ppp[1349]: tun0: Command: /dev/pts/1: dial
Jan 12 01:55:50 idxbox ppp[1349]: tun0: Phase: bundle: Establish
Jan 12 01:55:50 idxbox ppp[1349]: tun0: Phase: deflink: closed -> opening
Jan 12 01:55:50 idxbox ppp[1349]: tun0: Phase: deflink: Connected!
Jan 12 01:55:50 idxbox ppp[1349]: tun0: Phase: deflink: opening -> dial
Jan 12 01:55:50 idxbox ppp[1349]: tun0: Chat: deflink: Dial attempt 1 of 1
Jan 12 01:55:50 idxbox ppp[1349]: tun0: Chat: Send: AT^M
Jan 12 01:55:50 idxbox ppp[1349]: tun0: Chat: Expect(2): OK
Jan 12 01:55:52 idxbox ppp[1349]: tun0: Chat: Expect timeout
Jan 12 01:55:52 idxbox ppp[1349]: tun0: Chat: Send: AT^M
Jan 12 01:55:52 idxbox ppp[1349]: tun0: Chat: Expect(2): OK
Jan 12 01:55:54 idxbox ppp[1349]: tun0: Chat: Expect timeout
Jan 12 01:55:54 idxbox ppp[1349]: tun0: Warning: Chat script failed
Jan 12 01:55:54 idxbox ppp[1349]: tun0: Phase: deflink: dial -> hangup
Jan 12 01:55:54 idxbox ppp[1349]: tun0: Phase: deflink: Disconnected!
Jan 12 01:55:54 idxbox ppp[1349]: tun0: Phase: deflink: Connect time: 4 secs: 0 octets in, 0 octets out
Jan 12 01:55:54 idxbox ppp[1349]: tun0: Phase: deflink: 0 packets in, 0 packets out
Jan 12 01:55:54 idxbox ppp[1349]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Sun Jan 12 01:55:50 2003
Jan 12 01:55:54 idxbox ppp[1349]: tun0: Phase: deflink: hangup -> closed
Jan 12 01:55:54 idxbox ppp[1349]: tun0: Phase: bundle: Dead
----
----
my ppp.conf this way:
default:
 set log Phase Chat LCP IPCP CCP tun command
 set device /dev/cuau1
 set speed sync
 set dial "ABORT BUSY TIMEOUT 2 \
        \"\" \
        AT OK-AT-OK \
        AT+CFUN=1 OK-AT-OK \
        AT+CMEE=2 OK-AT-OK \
        AT+CSQ OK \
        AT+CGDCONT=1,\\\"IP\\\",\\\"internet\\\" OK \
        AT+CGACT? OK-AT-OK \
        AT+CGATT? OK \
        AT+CGCLASS? OK \
        AT+COPS? OK \
        ATD*99# CONNECT"

vivo:
 set authname vivo
 set authkey vivo
 set phone *99#
 set login "ABORT NO\\sCARRIER TIMEOUT 5 ogin:--ogin: ppp word: ppp"
 set timeout 0
 set ifaddr 192.168.1.0/0 127.0.0.1/0 255.255.255.0 0.0.0.0
# add default HISADDR
 enable dns
-----

Could not connect someone help me please?
Thanks.

Wesley Miranda
FreeBSD Consult
www.freebsdconsult.com.br