USB4BSD release candidate number 3 - request for review
Hans Petter Selasky
hselasky at c2i.net
Fri Oct 31 08:27:57 PDT 2008
Hi,
You need to update your kernel config file.
For example to enable AXE ethernet support you need both:
device usb2_ethernet
device usb2_ethernet_axe
Try:
kldload /boot/kernel/usb2*.ko
--HPS
On Friday 31 October 2008, Thomas Sparrevohn wrote:
> On Friday 31 October 2008 14:14:59 Hans Petter Selasky wrote:
> > On Friday 31 October 2008, Thomas Sparrevohn wrote:
> > > On Sunday 26 October 2008 15:33:20 Hans Petter Selasky wrote:
> > >
> > >
> > > What is the device naming change to?
> >
> > The device names under /dev are the same like before.
> >
> > --HPS
>
> I was thinking about in the Kernel configuration file - I have been using
> and it does not seem to attach anything
>
> #
> # GENERIC -- Generic kernel configuration file for FreeBSD/amd64
> #
> # For more information on this file, please read the handbook section on
> # Kernel Configuration Files:
> #
> #
> http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-conf
>ig.html #
> # The handbook is also available locally in /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise always see the
> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed explanations of the
> # device lines is also present in the ../../conf/NOTES and NOTES files.
> # If you are in doubt as to the purpose or necessity of a line, check first
> # in NOTES.
> #
> # $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.508 2008/10/03 10:31:31 stas Exp
> $
>
> cpu HAMMER
> ident GENERIC
>
> # To statically compile in device wiring instead of /boot/device.hints
> #hints "GENERIC.hints" # Default places to look for devices.
>
> makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
>
> options SCHED_ULE # ULE scheduler
> options PREEMPTION # Enable kernel thread preemption
> options INET # InterNETworking
> options INET6 # IPv6 communications protocols
> options SCTP # Stream Control Transmission Protocol
> options FFS # Berkeley Fast Filesystem
> options SOFTUPDATES # Enable FFS soft updates support
> options UFS_ACL # Support for access control lists
> options UFS_DIRHASH # Improve performance on big directories
> options UFS_GJOURNAL # Enable gjournal-based UFS journaling
> options MD_ROOT # MD is a potential root device
> options NFSCLIENT # Network Filesystem Client
> options NFSSERVER # Network Filesystem Server
> options NFSLOCKD # Network Lock Manager
> options NFS_ROOT # NFS usable as /, requires NFSCLIENT
> options NTFS # NT File System
> options MSDOSFS # MSDOS Filesystem
> options CD9660 # ISO 9660 Filesystem
> options PROCFS # Process filesystem (requires PSEUDOFS)
> options PSEUDOFS # Pseudo-filesystem framework
> options GEOM_PART_GPT # GUID Partition Tables.
> options GEOM_LABEL # Provides labelization
> options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
> options COMPAT_IA32 # Compatible with i386 binaries
> options COMPAT_FREEBSD4 # Compatible with FreeBSD4
> options COMPAT_FREEBSD5 # Compatible with FreeBSD5
> options COMPAT_FREEBSD6 # Compatible with FreeBSD6
> options COMPAT_FREEBSD7 # Compatible with FreeBSD7
> options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
> options KTRACE # ktrace(1) support
> options STACK # stack(9) support
> options SYSVSHM # SYSV-style shared memory
> options SYSVMSG # SYSV-style message queues
> options SYSVSEM # SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options STOP_NMI # Stop CPUS using NMI instead of IPI
> options AUDIT # Security event auditing
> options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
>
> # Debugging for use in -current
> options KDB # Enable kernel debugger support.
> options DDB # Support DDB.
> options GDB # Support remote GDB.
> options INVARIANTS # Enable calls of extra sanity checking
> options INVARIANT_SUPPORT # Extra sanity checks of internal structures,
> required by INVARIANTS options WITNESS # Enable checks to detect
> deadlocks and cycles
> options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
>
> # Make an SMP-capable kernel by default
> options SMP # Symmetric MultiProcessor Kernel
>
> # CPU frequency control
> device cpufreq
>
> # Bus support.
> device acpi
> device pci
>
> # Floppy drives
> device fdc
>
> # ATA and ATAPI devices
> device ata
> device atadisk # ATA disk drives
> device ataraid # ATA RAID drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> device atapist # ATAPI tape drives
> options ATA_STATIC_ID # Static device numbering
>
> # SCSI Controllers
> device ahc # AHA2940 and onboard AIC7xxx devices
> options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~128k to driver.
> device ahd # AHA39320/29320 and onboard AIC79xx devices
> options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~215k to driver.
> device amd # AMD 53C974 (Tekram DC-390(T))
> device hptiop # Highpoint RocketRaid 3xxx series
> device isp # Qlogic family
> #device ispfw # Firmware for QLogic HBAs- normally a module
> device mpt # LSI-Logic MPT-Fusion
> #device ncr # NCR/Symbios Logic
> device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
> device trm # Tekram DC395U/UW/F DC315U adapters
>
> device adv # Advansys SCSI adapters
> device adw # Advansys wide SCSI adapters
> device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
> device bt # Buslogic/Mylex MultiMaster SCSI adapters
>
> # SCSI peripherals
> device scbus # SCSI bus (required for SCSI)
> device ch # SCSI media changers
> device da # Direct Access (disks)
> device sa # Sequential Access (tape etc)
> device cd # CD
> device pass # Passthrough device (direct SCSI access)
> device ses # SCSI Environmental Services (and SAF-TE)
>
> # RAID controllers interfaced to the SCSI subsystem
> device amr # AMI MegaRAID
> device arcmsr # Areca SATA II RAID
> device ciss # Compaq Smart RAID 5*
> device dpt # DPT Smartcache III, IV - See NOTES for options
> device hptmv # Highpoint RocketRAID 182x
> device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
> device iir # Intel Integrated RAID
> device ips # IBM (Adaptec) ServeRAID
> device mly # Mylex AcceleRAID/eXtremeRAID
> device twa # 3ware 9000 series PATA/SATA RAID
>
> # RAID controllers
> device aac # Adaptec FSA RAID
> device aacp # SCSI passthrough for aac (requires CAM)
> device ida # Compaq Smart RAID
> device mfi # LSI MegaRAID SAS
> device mlx # Mylex DAC960 family
> #XXX pointer/int warnings
> #device pst # Promise Supertrak SX6000
> device twe # 3ware ATA RAID
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
>
> device kbdmux # keyboard multiplexer
>
> device vga # VGA video card driver
>
> device splash # Splash screen and screen saver support
>
> # syscons is the default console driver, resembling an SCO console
> device sc
>
> device agp # support several AGP chipsets
>
> # PCCARD (PCMCIA) support
> # PCMCIA and cardbus bridge support
> device cbb # cardbus (yenta) bridge
> device pccard # PC Card (16-bit) bus
> device cardbus # CardBus (32-bit) bus
>
> # Serial (COM) ports
> device uart # Generic UART driver
>
> # Parallel port
> device ppc
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
> #device vpo # Requires scbus and da
>
> # If you've got a "dumb" serial or parallel PCI card that is
> # supported by the puc(4) glue driver, uncomment the following
> # line to enable it (connects to sio, uart and/or ppc drivers):
> #device puc
>
> # PCI Ethernet NICs.
> device de # DEC/Intel DC21x4x (``Tulip'')
> device em # Intel PRO/1000 Gigabit Ethernet Family
> device igb # Intel PRO/1000 PCIE Server Gigabit Family
> device ixgb # Intel PRO/10GbE Ethernet Card
> device le # AMD Am7900 LANCE and Am79C9xx PCnet
> device ti # Alteon Networks Tigon I/II gigabit Ethernet
> device txp # 3Com 3cR990 (``Typhoon'')
> device vx # 3Com 3c590, 3c595 (``Vortex'')
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use these
> NICs! device miibus # MII bus support
> device ae # Attansic/Atheros L2 FastEthernet
> device age # Attansic/Atheros L1 Gigabit Ethernet
> device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
> device bfe # Broadcom BCM440x 10/100 Ethernet
> device bge # Broadcom BCM570xx Gigabit Ethernet
> device dc # DEC/Intel 21143 and various workalikes
> device et # Agere ET1310 10/100/Gigabit Ethernet
> device fxp # Intel EtherExpress PRO/100B (82557, 82558)
> device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
> device lge # Level 1 LXT1001 gigabit Ethernet
> device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
> device nfe # nVidia nForce MCP on-board Ethernet
> device nge # NatSemi DP83820 gigabit Ethernet
> #device nve # nVidia nForce MCP on-board Ethernet Networking
> device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
> device re # RealTek 8139C+/8169/8169S/8110S
> device rl # RealTek 8129/8139
> device sf # Adaptec AIC-6915 (``Starfire'')
> device sis # Silicon Integrated Systems SiS 900/SiS 7016
> device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
> device ste # Sundance ST201 (D-Link DFE-550TX)
> device tl # Texas Instruments ThunderLAN
> device tx # SMC EtherPower II (83c170 ``EPIC'')
> device vge # VIA VT612x gigabit Ethernet
> device vr # VIA Rhine, Rhine II
> device wb # Winbond W89C840F
> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
> # ISA Ethernet NICs. pccard NICs included.
> device cs # Crystal Semiconductor CS89x0 NIC
> # 'device ed' requires 'device miibus'
> device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
> device ex # Intel EtherExpress Pro/10 and Pro/10+
> device ep # Etherlink III based cards
> device fe # Fujitsu MB8696x based cards
> device sn # SMC's 9000 series of Ethernet chips
> device xe # Xircom pccard Ethernet
>
> # Wireless NIC cards
> device wlan # 802.11 support
> options IEEE80211_DEBUG # enable debug msgs
> options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
> device wlan_wep # 802.11 WEP support
> device wlan_ccmp # 802.11 CCMP support
> device wlan_tkip # 802.11 TKIP support
> device wlan_amrr # AMRR transmit rate control algorithm
> device an # Aironet 4500/4800 802.11 wireless NICs.
> device ath # Atheros pci/cardbus NIC's
> device ath_hal # Atheros HAL (Hardware Access Layer)
> device ath_rate_sample # SampleRate tx rate control for ath
> device ral # Ralink Technology RT2500 wireless NICs.
> device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
>
> # Pseudo devices.
> device loop # Network loopback
> device random # Entropy device
> device ether # Ethernet support
> device tun # Packet tunnel.
> device pty # BSD-style compatibility pseudo ttys
> device md # Memory "disks"
> device gif # IPv6 and IPv4 tunneling
> device faith # IPv6-to-IPv4 relaying (translation)
> device firmware # firmware assist module
>
> # The `bpf' device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> # Note that 'bpf' is required for DHCP.
> device bpf # Berkeley packet filter
>
> #
> # USB2
> #
> device usb2_core
> device usb2_controller
> device usb2_storage
> device usb2_ethernet
> device usb2_wlan
> device usb2_serial
> device usb2_input
> device usb2_quirk
> device usb2_template
> device usb2_image
>
>
> # USB support
> #device uhci # UHCI PCI->USB interface
> #device ohci # OHCI PCI->USB interface
> #device ehci # EHCI PCI->USB interface (USB 2.0)
> #device usb # USB Bus (required)
> ##device udbp # USB Double Bulk Pipe devices
> #device ugen # Generic
> #device uhid # "Human Interface Devices"
> #device ukbd # Keyboard
> #device ulpt # Printer
> #device umass # Disks/Mass storage - Requires scbus and da
> #device ums # Mouse
> #device ural # Ralink Technology RT2500USB wireless NICs
> #device rum # Ralink Technology RT2501USB wireless NICs
> #device urio # Diamond Rio 500 MP3 player
> #device uscanner # Scanners
> # USB Serial devices
> #device ucom # Generic com ttys
> #device uark # Technologies ARK3116 based serial adapters
> #device ubsa # Belkin F5U103 and compatible serial adapters
> #device uftdi # For FTDI usb serial adapters
> #device uipaq # Some WinCE based devices
> #device uplcom # Prolific PL-2303 serial adapters
> #device uslcom # SI Labs CP2101/CP2102 serial adapters
> #device uvisor # Visor and Palm devices
> #device uvscom # USB serial support for DDI pocket's PHS
> # USB Ethernet, requires miibus
> #device aue # ADMtek USB Ethernet
> #device axe # ASIX Electronics USB Ethernet
> #device cdce # Generic USB over Ethernet
> #device cue # CATC USB Ethernet
> #device kue # Kawasaki LSI USB Ethernet
> #device rue # RealTek RTL8150 USB Ethernet
> #device udav # Davicom DM9601E USB
>
> # FireWire support
> device firewire # FireWire bus code
> device sbp # SCSI over FireWire (Requires scbus and da)
> device fwe # Ethernet over FireWire (non-standard!)
> device fwip # IP over FireWire (RFC 2734,3146)
> device dcons # Dumb console driver
> device dcons_crom # Configuration ROM for dcons
More information about the freebsd-usb
mailing list