Copying to usb flash drive corrupts files

Mon Feb 18 04:29:08 PST 2008

Hello, I have similar problems with usb

dmesg:
Copyright (c) 1992-2008 The FreeBSD Project. 

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 

         The Regents of the University of California. All rights 
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation. 

FreeBSD 7.0-PRERELEASE #0: Mon Feb 11 16:53:19 MSK 2008 

     somebody at somewhere:/usr/obj/usr/src/sys/office 

Timecounter "i8254" frequency 1193182 Hz quality 0 

CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz (1614.39-MHz 686-class CPU) 

   Origin = "GenuineIntel"  Id = 0xf12  Stepping = 2 

Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,A
real memory  = 536854528 (511 MB) 

avail memory = 515842048 (491 MB) 

kbd1 at kbdmux0 

acpi0: <ASUS P4S333> on motherboard 

acpi0: [ITHREAD] 

acpi0: Power Button (fixed) 

acpi0: reservation of 0, a0000 (3) failed 

acpi0: reservation of 100000, 1ff00000 (3) failed 

Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 

acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 

cpu0: <ACPI CPU> on acpi0 

p4tcc0: <CPU Frequency Thermal Control> on cpu0 

acpi_button0: <Power Button> on acpi0 

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 

pci0: <ACPI PCI bus> on pcib0 

pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 

pci1: <ACPI PCI bus> on pcib1 

vgapci0: <VGA-compatible display> mem 
0xe7000000-0xe7ffffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on p
isab0: <PCI-ISA bridge> at device 2.0 on pci0 

isa0: <ISA bus> on isab0 

ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 6 at 
device 2.2 on pci0
ohci0: [GIANT-LOCKED] 

ohci0: [ITHREAD] 

usb0: OHCI version 1.0, legacy support 

usb0: SMM does not respond, resetting 

usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0 

uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 

uhub0: 3 ports with 3 removable, self powered 

ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 9 at 
device 2.3 on pci0
ohci1: [GIANT-LOCKED] 

ohci1: [ITHREAD] 

usb1: OHCI version 1.0, legacy support 

usb1: SMM does not respond, resetting 

usb1: <SiS 5571 USB controller> on ohci1 

usb1: USB revision 1.0 

uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 

uhub1: 3 ports with 3 removable, self powered 

atapci0: <SiS 961 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 2.5
ata0: <ATA channel 0> on atapci0 

ata0: [ITHREAD] 

ata1: <ATA channel 1> on atapci0 

ata1: [ITHREAD] 

pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 10 at device 5.0 on pci0 

pcm0: [ITHREAD] 

rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 
0xe5000000-0xe50000ff irq 10 at device 9.0 on pci0
miibus0: <MII bus> on rl0 

rlphy0: <RealTek internal media interface> PHY 0 on miibus0 

rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 

rl0: Ethernet address: 00:c1:28:01:cb:a1 

rl0: [ITHREAD] 

skc0: <SysKonnect Gigabit Ethernet (V2.0)> port 0xa000-0xa0ff mem 
0xe4800000-0xe4803fff irq 5 at device 10.
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7) 

sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 

sk0: Ethernet address: 00:0c:46:46:6e:01 

miibus1: <MII bus> on sk0 

e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 

e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
1000baseTX-FDX, auto
skc0: [ITHREAD]
skc0: <SysKonnect Gigabit Ethernet (V2.0)> port 0xa000-0xa0ff mem 
0xe4800000-0xe4803fff irq 5 at device 10.
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7) 

sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 

sk0: Ethernet address: 00:0c:46:46:6e:01 

miibus1: <MII bus> on sk0 

e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 

e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
1000baseTX-FDX, auto
skc0: [ITHREAD] 

sym0: <1010-33> port 0x9800-0x98ff mem 
0xe4000000-0xe40003ff,0xe3800000-0xe3801fff irq 10 at device 13.0 on
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking 

sym0: open drain IRQ line driver, using on-chip SRAM 

sym0: using LOAD/STORE-based firmware. 

sym0: handling phase mismatch from SCRIPTS. 

sym0: SCAN AT BOOT disabled for targets 1 2 3 4 5 6 8 9 10 11 12 13 14 
15.
sym0: SCAN FOR LUNS disabled for targets 1 2 3 4 5 6 8 9 10 11 12 13 14 
15.
sym0: [GIANT-LOCKED] 

sym0: [ITHREAD] 

sym1: <1010-33> port 0x9400-0x94ff mem 
0xe3000000-0xe30003ff,0xe2800000-0xe2801fff irq 10 at device 13.1 on
sym1: Symbios NVRAM, ID 7, Fast-80, SE, NO parity 

sym1: open drain IRQ line driver, using on-chip SRAM 

sym1: using LOAD/STORE-based firmware. 

sym1: handling phase mismatch from SCRIPTS. 

sym1: SCAN AT BOOT disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 
15.
sym1: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 
14 15.
sym1: [GIANT-LOCKED] 

sym1: [ITHREAD] 

sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A 

sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 

sio1: type 16550A 

sio1: [FILTER] 

atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 

atkbd0: <AT Keyboard> irq 1 on atkbdc0 

kbd0 at atkbd0 

atkbd0: [GIANT-LOCKED] 

atkbd0: [ITHREAD] 

pmtimer0 on isa0 

orm0: <ISA Option ROMs> at iomem 
0xc0000-0xcefff,0xd0000-0xd3fff,0xd4000-0xd57ff,0xd8000-0xdbfff pnpid ORM0
sc0: <System console> at flags 0x100 on isa0 

sc0: VGA <16 virtual consoles, flags=0x300> 

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
isa0
fdc0: No FDOUT register! 

ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 
0/0, rev 1.10/3.00, addr 2> on uhub0
ums0: 3 buttons and Z dir. 

umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on 
uhub1
Timecounter "TSC" frequency 1614387304 Hz quality 800 

Timecounters tick every 10.000 msec 

ipfw2 initialized, divert loadable, rule-based forwarding enabled, 
default to deny, logging disabled
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. 

(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. 

da0 at sym0 bus 0 target 0 lun 0 

da0: <SEAGATE ST336706LW 010A> Fixed Direct Access SCSI-3 device 

da0: 160.000MB/s transfers (80.000MHz DT, offset 62, 16bit) 

da0: Command Queueing Enabled
da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C) 

ubdevs -v:
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), 
SiS(0x0000), rev 1.00
  port 1 powered
  port 2 addr 2: low speed, power 100 mA, config 1, Microsoft 3-Button 
Mouse with IntelliEye(TM)(0x0040), Microsoft(0x045e), rev 3.00
  port 3 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), 
SiS(0x0000), rev 1.00
  port 1 addr 2: full speed, power 100 mA, config 1, DataTraveler 
2.0(0x1603), Kingston(0x0951), rev 2.00
  port 2 powered
  port 3 powered