usb/112461: ehci USB 2.0 doesn't work on nforce4

Sun May 6 12:25:19 UTC 2007

On Sunday 06 May 2007 13:51, Igor Popov wrote:
> >Number:         112461
> >Category:       usb
> >Synopsis:       ehci USB 2.0 doesn't work on nforce4
> >Confidential:   no
> >Severity:       non-critical
> >Priority:       medium
> >Responsible:    freebsd-usb
> >State:          open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class:          sw-bug
> >Submitter-Id:   current-users
> >Arrival-Date:   Sun May 06 12:00:11 GMT 2007
> >Closed-Date:
> >Last-Modified:
> >Originator:     Igor Popov
> >Release:        6.0, 6.1, 6.2
> >Organization:
> >Environment:
>
> FreeBSD unix.my.net 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Sat Jan 27 13:01:18
> EET 2007     toor at unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL  i386
>
> >Description:
>
> I have motherboard(Asus A8N-E) that built on nforce4 chipset, it has usb
> 2.0 ports, but under FreeBSD with usb 2.0 flashdrive max speed near 1.2Mb/s
> on file copying (my custom kernel has ehci driver), that is usb1.[01]
> speed. But under both linux an windows with the same flashdrive speed is
> near 10Mb/s.
>
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-RELEASE #0: Sat Jan 27 13:01:18 EET 2007
>     toor at unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL
> ACPI APIC Table: <Nvidia AWRDACPI>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 Processor 3000+ (1809.28-MHz 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x20ff2  Stepping = 2
>  
> Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
>,CM OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
>   Features2=0x1<SSE3>
>   AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
>   AMD Features2=0x1<LAHF>
> real memory  = 536805376 (511 MB)
> avail memory = 507523072 (484 MB)
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> wlan: mac acl policy registered
> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> acpi0: <Nvidia AWRDACPI> on motherboard
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi0: Power Button (fixed)
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <memory> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> nfsmb0: <nForce2/3/4 MCP SMBus Controller> port
> 0xe400-0xe41f,0x4c00-0x4c3f,0x4c 40-0x4c7f irq 20 at device 1.1 on pci0
> smbus0: <System Management Bus> on nfsmb0
> smb0: <SMBus generic I/O> on smbus0
> nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0
> smbus1: <System Management Bus> on nfsmb1
> smb1: <SMBus generic I/O> on smbus1
> ohci0: <OHCI (generic) USB controller> mem 0xd3104000-0xd3104fff irq 21 at
> devic e 2.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 10 ports with 10 removable, self powered
> ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22
> at d evice 2.1 on pci0
> ehci0: [GIANT-LOCKED]
> usb1: EHCI version 1.0
> usb1: companion controller, 4 ports each: usb0
> usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
> usb1: USB revision 2.0
> uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub1: 10 ports with 10 removable, self powered
> pcm0: <nVidia nForce4> port 0xdc00-0xdcff,0xe000-0xe0ff mem
> 0xd3103000-0xd3103ff f irq 23 at device 4.0 on pci0
> pcm0: <Avance Logic ALC850 AC97 Codec>
> atapci0: <nVidia nForce CK804 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0 x177,0x376,0xf000-0xf00f at device 6.0 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> atapci1: <nVidia nForce CK804 SATA300 controller> port
> 0x9f0-0x9f7,0xbf0-0xbf3,0 x970-0x977,0xb70-0xb73,0xd800-0xd80f mem
> 0xd3102000-0xd3102fff irq 21 at device 7.0 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> atapci2: <nVidia nForce CK804 SATA300 controller> port
> 0x9e0-0x9e7,0xbe0-0xbe3,0 x960-0x967,0xb60-0xb63,0xc400-0xc40f mem
> 0xd3101000-0xd3101fff irq 22 at device 8.0 on pci0
> ata4: <ATA channel 0> on atapci2
> ata5: <ATA channel 1> on atapci2
> pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
> pci5: <ACPI PCI bus> on pcib1
> ath0: <Atheros 5212> mem 0xd3000000-0xd300ffff irq 16 at device 6.0 on pci5
> ath0: Ethernet address: 00:15:e9:a4:58:9b
> ath0: mac 7.9 phy 4.5 radio 5.6
> nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xb000-0xb007 mem
> 0xd3 100000-0xd3100fff irq 23 at device 10.0 on pci0
> miibus0: <MII bus> on nfe0
> e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0
> e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
> auto nfe0: Ethernet address: 00:17:31:13:8d:3f
> nfe0: [FAST]
> pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
> pci4: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
> pci2: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
> pci1: <ACPI PCI bus> on pcib5
> nvidia0: <GeForce 7900 GT/GTO> port 0xa000-0xa07f mem
> 0xd0000000-0xd0ffffff,0xc0 000000-0xcfffffff,0xd1000000-0xd1ffffff irq 18
> at device 0.0 on pci1 nvidia0: [GIANT-LOCKED]
> acpi_tz0: <Thermal Zone> on acpi0
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0 sio0: type 16550A
> ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 1809282513 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 238475MB <HDS722525VLAT80 V36OA6MA> at ata0-master UDMA100
> acd0: DVDR <ASUS DRW-1608P/1.59> at ata1-master UDMA66
> ad1: 190782MB <Seagate ST3200822AS 3.01> at ata5-master SATA150
> Trying to mount root from ufs:/dev/ad0s2a
> ath0: link state changed to UP
> nfe0: link state changed to UP
> umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 2
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device
> da0: 40.000MB/s transfers
> da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)
>

This is maybe a SCSI problem.

If you install the new USB stack [the SVN version], see:

http://www.turbocat.net/~hselasky/usb4bsd

Then try to copy some files and turn on debugging:

sysctl hw.usb.umass.debug=-1

You might get a lot of messages. Look for errors.

--HPS