usb/92142: SET_ADDR_FAILED and SHORT_XFER errors from usb drivers on GA-7DX+

[Christopher Armstrong]

>Number:         92142
>Category:       usb
>Synopsis:       SET_ADDR_FAILED and SHORT_XFER errors from usb drivers on GA-7DX+
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    freebsd-usb
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sun Jan 22 09:00:17 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator:     Christopher Armstrong
>Release:        6.0-STABLE i386
>Organization:
>Environment:
>Description:
During booting, or when plugging in different USB devices after unplugging them, I get the following errors:

uhub0: port 1, set config at addr 2 failed
uhub0: device problem (SHORT_XFER), disabling port 1
uhub0: device problem (SHORT_XFER), disabling port 2

The kernel output before this suggests that it has detected my usb hub and plugged in devices correctly. Running usbdevs after bootup gives an error message:

addr 0: (this shouldn't happen)

(or something like that). If I leave the computer for a small while (1-2 min), I get error messages similar to the above, but with SET_ADDR_FAILED in parenthesis. I can unplug devices and put them somewhere else, but I get the SET_ADDR_FAILED error messages with FreeBSD reporting that it has disabled the corresponding port, rendering the device unusable or undetectable. This prevents me from using my USB Ethernet modem (Motorola SB5100), which otherwise ends up with a device node (/dev/net/cdce0). Disabling and enabling ACPI seems to make no difference (same error messages).

I am using a Gigabyte GA-7DX+ motherboard, latest BIOS update. It has a VIA 686B south-bridge chipset, and a AMD 761 chipset. I'm thinking that the drivers are not giving enough time to the usb bus to send data back. The hardware works correctly and without errors in Windows 2000, and works with Linux kernel version 2.6.14, with the irqpoll option on (without this, the Linux usb stack would crash, reporting an irq conflict, which I think I solved by moving by SBLive5.1 card).


>How-To-Repeat:
Hardware:

Gigabyte GA-7DX+ motherboard (AMD 761 chipset, VIA 686B south-bridge)
AMD Athlon XP 2000+
2 usb ports with following layout:
  port 0: nothing
  port 1: generic usb hub with 4 ports
   port 1a: brother hl2040 printer
   port 1b: Motorola Surfboard SB5100 modem
   port 1c,1d: nothing

try bootup with devices plugged in.             
>Fix:
              
>Release-Note:
>Audit-Trail:
>Unformatted: