Huawei E220 3G devices

[Jes]

Hi:

I have not such 'usbctl'... What is 'usbctl'? only 'usbdevs' and usbhidctl... and this, usbhidctl, is not very useful I guess... so... I put /var/log/messages and 'usbdevs'. Note that I haven't 'usbmass' in my kernel; it's compiled as a module and not loaded. Then the huawei modem cannot be interpreted as a mass-storage devices.... can it?

/var/log/messages:

Dec 18 16:50:10 barbikane kernel: ucom0: HUAWEI Technologies HUAWEI Mobile, rev 1.10/0.00, addr 2
Dec 18 16:50:10 barbikane kernel: ucom0: Could not find interrupt in
Dec 18 16:50:10 barbikane kernel: device_attach: ucom0 attach returned 6
Dec 18 16:50:10 barbikane kernel: ucom0: HUAWEI Technologies HUAWEI Mobile, rev 1.10/0.00, addr 2
Dec 18 16:50:10 barbikane kernel: ucom0: Could not find interrupt in
Dec 18 16:50:10 barbikane kernel: device_attach: ucom0 attach returned 6

usbdevs -v

root at barbikane# usbdevs
addr 1: UHCI root hub, Intel
addr 1: UHCI root hub, Intel
 addr 2: HUAWEI Mobile, HUAWEI Technologies
addr 1: UHCI root hub, Intel
 addr 2: ELECOM USB mouse with wheel, ELECO
addr 1: EHCI root hub, Intel
root at barbikane# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 addr 2: full speed, power 500 mA, config 1, HUAWEI Mobile(0x1003), HUAWEI Technologies(0x12d1), rev 0.00
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 addr 2: low speed, power 100 mA, config 1, ELECOM USB mouse with wheel(0x0010), ELECO(0x056e), rev 0.00
 port 2 powered
Controller /dev/usb3:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
 port 7 powered
 port 8 powered


uname -a:

FreeBSD barbikane 6.0-RELEASE FreeBSD 6.0-RELEASE #4: Fri Nov 24 19:03:59 CET 2006
jjess at barbikane:/usr/src/sys/i386/compile/MYKERNEL  i386

Greetings,

Jes