usb/76240: USB camera panics kernel

Sat Jan 22 01:50:10 PST 2005

The following reply was made to PR usb/76240; it has been noted by GNATS.

From: Carsten Menke <bootsy52 at gmx.net>
To: freebsd-gnats-submit at FreeBSD.org, marko at FreeBSD.org
Cc:  
Subject: Re: usb/76240: USB camera panics kernel
Date: Sat, 22 Jan 2005 09:44:59 +0100

 Exactly the same here, before I was running 5.3-RELEASE then at least as
 root it was possible to use the camera with digikam (I have exactly the same 
 model) and I also have OHCI. After updating yesterday to 5.3-STABLE it now is 
 100% reproducible as I'm now completley unable to use the camera as every 
 attempt completley freezes the system (no panic though).

 the only thing I found in the logs is:

 Jan 18 08:41:57 chantal kernel: ugen0: detached
 Jan 18 09:34:21 chantal kernel: ugen0: Canon Inc. Canon Digital Camera, rev 
 1.10/0.01, addr 2
 Jan 18 09:34:58 chantal su: chantal to root on /dev/ttyp4
 Jan 18 09:34:58 chantal su: chantal to root on /dev/ttyp4
 Jan 18 09:41:35 chantal kernel: ugen0: at uhub0 port 1 (addr 2) disconnected
 Jan 18 09:42:35 chantal kernel: usb_detach_wait: ugen0 didn't detach
 Jan 18 09:43:35 chantal kernel: usb_detach_wait: ugen0 didn't detach

 I will try the patch, too. Hope it helps at least a bit.

 Here is my dmesg:

 //Carsten

 Copyright (c) 1992-2005 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
          The Regents of the University of California. All rights reserved.
 FreeBSD 5.3-STABLE #6: Thu Jan 20 06:54:05 CET 2005
      root at chantal.bootsy.home:/usr/src/sys/i386/compile/BOOTSY52
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: AMD Athlon(tm) Processor (1394.08-MHz 686-class CPU)
    Origin = "AuthenticAMD"  Id = 0x644  Stepping = 4

 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
    AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
 real memory  = 536805376 (511 MB)
 avail memory = 515616768 (491 MB)
 acpi0: <AMIINT SiS735XX> on motherboard
 acpi0: Power Button (fixed)
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 cpu0: <ACPI CPU (3 Cx states)> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
 pcib1: <PCI-PCI bridge> at device 1.0 on pci0
 pci1: <PCI bus> on pcib1
 pci1: <display, VGA> at device 0.0 (no driver attached)
 isab0: <PCI-ISA bridge> at device 2.0 on pci0
 isa0: <ISA bus> on isab0
 ohci0: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 11 at device 2.2 
 on pci0
 ohci0: [GIANT-LOCKED]
 usb0: OHCI version 1.0, legacy support
 usb0: <SiS 5571 USB controller> on ohci0
 usb0: USB revision 1.0
 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 3 ports with 3 removable, self powered
 ohci1: <SiS 5571 USB controller> mem 0xcffff000-0xcfffffff irq 5 at device 2.3 
 on pci0
 ohci1: [GIANT-LOCKED]
 usb1: OHCI version 1.0, legacy support
 usb1: <SiS 5571 USB controller> on ohci1
 usb1: USB revision 1.0
 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 3 ports with 3 removable, self powered
 atapci0: <SiS 735 UDMA100 controller> port 
 0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
 ata0: channel #0 on atapci0
 ata1: channel #1 on atapci0
 pcm0: <SiS 7012> port 0xd800-0xd83f,0xdc00-0xdcff irq 11 at device 2.7 on pci0
 pcm0: [GIANT-LOCKED]
 pcm0: <Realtek ALC100 AC97 Codec>
 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 
 0xcfffdf80-0xcfffdfff irq 5 at device 11.0 on pci0
 miibus0: <MII bus> on xl0
 bmtphy0: <3c905B 10/100 internal PHY> on miibus0
 bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 xl0: Ethernet address: 00:50:04:50:fb:41
 acpi_button0: <Sleep Button> on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: model IntelliMouse, device ID 3
 fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 
 on acpi0
 fdc0: [FAST]
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
 sio1: type 16550A
 ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/16 bytes threshold
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 npx0: [FAST]
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
 pmtimer0 on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounter "TSC" frequency 1394075963 Hz quality 800
 Timecounters tick every 10.000 msec
 ad0: 58644MB <IC35L060AVV207-0/V22OA66A> [119150/16/63] at ata0-master UDMA100
 acd0: CDRW <R/RW 4x4x32/1.4B> at ata1-master PIO4
 acd1: CDROM <ATAPI CDROM 48X/V130Y> at ata1-slave UDMA33
 cd1 at ata1 bus 0 target 1 lun 0
 cd1: < ATAPI CDROM.48X 130Y> Removable CD-ROM SCSI-0 device
 cd1: 33.000MB/s transfers
 cd1: Attempt to query device size failed: NOT READY, Medium not present
 cd0 at ata1 bus 0 target 0 lun 0
 cd0: <IDE-CD R/RW 4x4x32 1.4B> Removable CD-ROM SCSI-0 device
 cd0: 16.000MB/s transfers
 cd0: Attempt to query device size failed: NOT READY, Medium not present
 Mounting root from ufs:/dev/ad0s1a
 WARNING: / was not properly dismounted
 WARNING: /home was not properly dismounted
 /home: mount pending error: blocks 60 files 9
 /home: superblock summary recomputed
 WARNING: /tmp was not properly dismounted
 WARNING: /usr was not properly dismounted
 /usr: mount pending error: blocks 468 files 4
 /usr: superblock summary recomputed
 WARNING: /var was not properly dismounted
 /var: mount pending error: blocks 2560 files 2
 /var: superblock summary recomputed
 drm0: <ATI Rage 128 RL (AGP)> port 0xb800-0xb8ff mem 
 0xcfefc000-0xcfefffff,0xc8000000-0xcbffffff irq 5 at device 0.0 on pci1
 info: [drm] AGP at 0xd0000000 64MB
 info: [drm] Initialized r128 2.5.0 20030725 on minor 0

 -- 
 "There are two major products that come out of Berkeley: LSD and UNIX.
    We don't believe this to be a coincidence." --Jeremy S. Anderson