Problems with ScanJet 4300C

[P.U.Kruppa]

Hello,

I am running 6.0-BETA2. Since my USB Scanner HP ScanJet 4300C is 
listed as supported hardware, I tried to get it working with
sane-niash driver.

According to 
http://home.kabelfoon.nl/~bertrik/hp3300c/README.html
- which is the home of sane-niash - I rebuilt my kernel _without_
 	device	uscanner
and installed /devel/libusb .

When I attach my scanner to the USB port I receive
 	------------------------------------------------
ugen0: at uhub0 port 1 (addr 2) disconnected
ugen0: vendor 0x03f0 product 0x0305, rev 1.00/0.00, addr 2
ugen0: setting configuration index 0 failed
device_attach: ugen0 attach returned 6
  	-----------------------------------------------


# usbdevs -v
 	-----------------------------------------------
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root 
hub(0x0000), Intel(0x0000), rev 1.00
  port 1 addr 2: full speed, self powered, unconfigured, product 
0x0305(0x0305), vendor 0x03f0(0x03f0), rev 0.00
  port 2 powered
 	-----------------------------------------------


# sane-find-scanner
 	-----------------------------------------------
   # No SCSI scanners found. If you expected something different, 
make sure that
   # you have loaded a SCSI driver for your SCSI adapter.

   # No USB scanners found. If you expected something different, 
make sure that
   # you have loaded a driver for your USB host controller and 
have installed a
   # kernel scanner module.

   # Not checking for parallel port scanners.

   # Most Scanners connected to the parallel port or other 
proprietary ports
   # can't be detected by this program.
 	------------------------------------------------------

Can anybody help me with this?


Thanks,

Uli.



*********************************************
* Peter Ulrich Kruppa - Wuppertal - Germany *
*********************************************