Zpool doesn't boot anymore after FreeBSD 12.1

[Cassiano Peixoto]

Hi there,

Anyone can help please? I've many servers with this same issue. Thanks

On Fri, Oct 16, 2020 at 10:24 AM Cassiano Peixoto <peixotocassiano at gmail.com>
wrote:

> Hi there,
>
> I have a FreeBSD 12.1-STABLE running on VMWARE with one disk. Then I added two more disks to expand my pool. BTW I already did it many time with no issues.
>
> I ran:
>
> # zpool status
>   pool: zroot
>  state: ONLINE
> status: Some supported features are not enabled on the pool. The pool can
> 	still be used, but some features are unavailable.
> action: Enable all features using 'zpool upgrade'. Once this is done,
> 	the pool may no longer be accessible by software that does not support
> 	the features. See zpool-features(7) for details.
>   scan: none requested
> config:
>
> 	NAME         STATE     READ WRITE CKSUM
> 	zroot        ONLINE       0     0     0
> 	  gpt/disk0  ONLINE       0     0     0
>
> errors: No known data errors
>
> # zpool add -f zroot da1
> # zpool add -f zroot da2
> # zpool status
>   pool: zroot
>  state: ONLINE
>   scan: none requested
> config:
>
> 	NAME         STATE     READ WRITE CKSUM
> 	zroot        ONLINE       0     0     0
> 	  gpt/disk0  ONLINE       0     0     0
> 	  da1        ONLINE       0     0     0
> 	  da2        ONLINE       0     0     0
>
> errors: No known data errors
> # reboot
>
> Then my system doesn’t boot anymore, i got the following error:
>
> gptzfsboot: error 4 lba 2038346899
> gptzfsboot: error 4 lba 1361327267
> /boot/config: -Dh
>
> BTX loader 1.00  BTX version is 1.02
> Consoles: internal video/keyboard serial port
> BIOS drive A: is fd0
> BIOS drive C: is disk0
> BIOS drive D: is disk1
> BIOS drive E: is disk2
> BIOS drive F: is disk3
> BIOS drive G: is disk4
> BIOS drive H: is disk5
> ZFS: i/o error - all block copies unavailable
> ZFS: failed to read pool zroot directory object
> BIOS 638kB/3143616kB available memory
>
> FreeBSD/x86 bootstrap loader, Revision 1.1
> ERROR: cannot open /boot/lua/loader.lua: invalid argument.
>
> Type '?' for list of commands, 'help' for more datailed help.
> OK
>
> I can import my pool with no problems using the lived, but I could not fix it.
>
> Seems a bug after 12.1-STABLE. Please, anyone can take a look ok that?
>
> Thanks.
>
>
>
>