Upgrade from 10.4 stable to 11.0 releng fails

[Eugene Grosbein]

13.11.2018 4:08, Sven Vermeulen wrote:

> COMPAT_FREEBSD10 was indeed missing in my custom kernel config.
> 
> Now after a reboot the system continues, but then natd failed to start:
> 
> # /etc/rc.d/natd start
> Starting natd.
> natd: unknown interface name xl0
> /etc/rc.d/natd: WARNING: failed to start natd
> 
> While xl0 is up and running:
> 
> # ifconfig xl0
> xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=82009<RXCSUM,VLAN_MTU,WOL_MAGIC,LINKSTATE>
>         ether 00:50:da:e3:31:f6
>         inet 82.94.48.144 netmask 0xffffffff broadcast 82.94.48.144 vhid 255
>         inet 10.0.0.150 netmask 0xffffff00 broadcast 10.0.0.255 vhid 3
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: Ethernet autoselect (100baseTX <full-duplex>)
>         status: active
> 
> Is this because of the new binaries (natd) are not yet installed?

Quite possible.