sudo not available after configuring ipmi serial over lan

[Eugene Grosbein]

08.11.2018 5:56, Jordan Caraballo wrote:

> Hi guys,
> 
> After configuring ipmi serial over lan console, I am not being able to
> execute any command related to sudo; not even "sudo su -". I am using ttyu0
> and COM1 on a Dell R530. Everything regarding receiving output and typing
> at the serial console is fine; the only command not working is sudo.
> 
> Any ideas? Below are the configurations.
> 
> /etc/ttys
> 
> # Serial terminals
> # The 'dialup' keyword identifies dialin lines to login, fingerd etc.
> #ttyu0  "/usr/libexec/getty 3wire"      vt100   onifconsole secure
> ttyu0   "/usr/libexec/getty std.115200" vt100   on          secure

Use network access to perform the following:

1) Change "on" to "off" for ttyu0 then run "init q" to apply changes.
2) Replace "ttyu0" with "cuau0" within same line then run "init q" again.

Then retry using console and sudo.