unable to boot 11.2-BETA1 on BeagleBone

[Christopher Hall]

Hello Glen,

On Tue, 15 May 2018 13:46:49 +0000, Glen Barber <gjb at FreeBSD.org> wrote:

> On Sat, May 12, 2018 at 04:33:26PM -0500, Mike Karels wrote:
> > I tried to boot 11.2-BETA1 on a BeagleBone Black that had been
> > running 11.1-RELEASE.  It didn't boot, falling back to the EMMC
> > (which isn't bootable, a different problem).  I was also unable to
> > boot the snapshot from 12/20. I see that the boot partition has
> > different contents:
> > 
> > 11.1-RELEASE:
> > MLO             u-boot.img      ubldr           ubldr.bin
> > 
> > 11.2-BETA1:
> > MLO             boot.scr        u-boot.img      ubldr.bin
> > 
> > Has anyone else been able to boot on a BeagleBone?
> >   
> 
> I saw this too with 11.2-BETA1, but due to inconsistencies between two
> different BeagleBone SoCs used to test, could not rule out if the
> problem was due to local hardware failure.
> 
> Specifically, one of two I have has the EMMC overwritten to avoid
> needing to "manually" boot FreeBSD, and the UART does not work
> correctly (because I am dangerous with solder), and nothing outputted
> on the HDMI console.  The other system has working EMMC, seemingly
> broken HDMI output, but working UART that only displayed repeated 'C'
> when booting.

Just tried
FreeBSD-11.2-PRERELEASE-arm-armv6-BEAGLEBONE-20180504-r333226.img.xz

on my working BBB but only got repeated 'C' on serial port.

the boot partition on uSD shows:
# ll /.autofs/da2s1
total 700
-rwxrwxrwx  1 root  wheel   77092 2018-05-04 09:58 MLO*
-rwxrwxrwx  1 root  wheel     199 2018-05-04 11:43 boot.scr*
-rwxrwxrwx  1 root  wheel  393872 2018-05-04 09:58 u-boot.img*
-r-xr-xr-x  1 root  wheel  236388 2018-05-04 11:42 ubldr.bin*

> 
> So, I wasn't entirely sure if it was "just me" or not.
> 
> Could you please open a PR about this, assigned to freebsd-arm@ and
> with re@ in CC?
> 
> Glen
> 


-- 
Best Regards.
Christopher Hall.