dev.cpu.0.freq/dev.cpu.0.freq_levels support on E5v4

[Ultima]

Check bios settings. I think this occurs if the c states are set to
hardware controlled and not set to software controlled. The setting names
and values may may vary depending on the manufacturer.

On Sat, Jan 14, 2017 at 1:40 PM, Slawa Olhovchenkov <slw at zxy.spb.ru> wrote:

> I am have stable/11 and E5v4.
> I am don't see cpufreq support by sysctl:
>
> # sysctl dev.cpu.0
> dev.cpu.0.cx_method: C1/hlt
> dev.cpu.0.cx_usage_counters: 61755
> dev.cpu.0.cx_usage: 100.00% last 1us
> dev.cpu.0.cx_lowest: C2
> dev.cpu.0.cx_supported: C1/1/1
> dev.cpu.0.%parent: acpi0
> dev.cpu.0.%pnpinfo: _HID=ACPI0007 _UID=0
> dev.cpu.0.%location: handle=\_SB_.SCK0.CP00 _PXM=0
> dev.cpu.0.%driver: cpu
> dev.cpu.0.%desc: ACPI CPU
>
> # grep -i freq /var/run/dmesg.boot
> Event timer "RTC" frequency 32768 Hz quality 0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 350
> Event timer "HPET1" frequency 14318180 Hz quality 340
> Event timer "HPET2" frequency 14318180 Hz quality 340
> Event timer "HPET3" frequency 14318180 Hz quality 340
> Event timer "HPET4" frequency 14318180 Hz quality 340
> Event timer "HPET5" frequency 14318180 Hz quality 340
> Event timer "HPET6" frequency 14318180 Hz quality 340
> Event timer "HPET7" frequency 14318180 Hz quality 340
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> est8: <Enhanced SpeedStep Frequency Control> on cpu8
> est9: <Enhanced SpeedStep Frequency Control> on cpu9
> est10: <Enhanced SpeedStep Frequency Control> on cpu10
> est11: <Enhanced SpeedStep Frequency Control> on cpu11
> est12: <Enhanced SpeedStep Frequency Control> on cpu12
> est13: <Enhanced SpeedStep Frequency Control> on cpu13
> est14: <Enhanced SpeedStep Frequency Control> on cpu14
> est15: <Enhanced SpeedStep Frequency Control> on cpu15
> est16: <Enhanced SpeedStep Frequency Control> on cpu16
> est17: <Enhanced SpeedStep Frequency Control> on cpu17
> est18: <Enhanced SpeedStep Frequency Control> on cpu18
> est19: <Enhanced SpeedStep Frequency Control> on cpu19
> est20: <Enhanced SpeedStep Frequency Control> on cpu20
> est21: <Enhanced SpeedStep Frequency Control> on cpu21
> est22: <Enhanced SpeedStep Frequency Control> on cpu22
> est23: <Enhanced SpeedStep Frequency Control> on cpu23
> Timecounter "TSC-low" frequency 1100023294 Hz quality 1000
>
> How to enable cpufreq support for powerd?
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>