FreeBSD with Huawei 3g modem.

[Peter Ankerstål]

Hi!

Im trying to get a Huawei E3531 to work in FreeBSD. But Im not really 
sure where to start. I found this: 
http://technotation.com/2012/08/15/freebsd-and-mobile-broadband/ but 
havent had any luck cut and pasting here.

System:
# uname -srm
FreeBSD 10.0-RELEASE amd64

When I connect it dmesg says:
usb_alloc_device: Found possible auto-install disk (trying next config)
ugen0.4: <HUAWEI> at usbus0
umass0: <HUAWEI HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 4> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:5:0:-1: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device
da0: Serial Number FFFFFFFFFFFFFFFF
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>

usbconfig gives this:

# usbconfig -u 0 -a 4 dump_device_desc
ugen0.4: <HUAWEI Mobile HUAWEI> at usbus0, cfg=1 md=HOST spd=HIGH 
(480Mbps) pwr=ON (500mA)

   bLength = 0x0012
   bDescriptorType = 0x0001
   bcdUSB = 0x0200
   bDeviceClass = 0x0000
   bDeviceSubClass = 0x0000
   bDeviceProtocol = 0x00ff
   bMaxPacketSize0 = 0x0040
   idVendor = 0x12d1
   idProduct = 0x157d
   bcdDevice = 0x0102
   iManufacturer = 0x0001  <HUAWEI>
   iProduct = 0x0002  <HUAWEI Mobile>
   iSerialNumber = 0x0003  <FFFFFFFFFFFFFFFF>
   bNumConfigurations = 0x0002


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3738 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20140923/b7eca2a7/attachment.bin>