geom_stripe problem in freebsd 10.0-rc1

[Marcelo Gondim]

Em 14/12/13 19:20, Adam McDougall escreveu:
>
> On 12/13/2013 17:12, Marcelo Gondim wrote:
>> Hi all,
>>
>> Anyone here seen it? First time I saw it happen. I'm here using a 
>> FreeBSD 10.0-RC1 and doing some tests with the raid0(geom_stripe) but 
>> is giving the following :
>>
>> I'm here with 3 discs being ada0 with the system and have the ADA1 
>> and ada2to do the raid 0.
>>
>>
>> # kldload geom_stripe
>> # gstripe label -v st0 /dev/ada1 /dev/ada2
>>
>> GEOM_STRIPE: Device st0 created (id=2255281675).
>> GEOM_STRIPE: Disk ada1 attached to st0.
>> GEOM_PART: integrity check failed (ada1, BSD)
>> GEOM_STRIPE: Cannot add disk diskid/DISK-MSE421RP27UT1K to st0 
>> (error=17).
>> GEOM_PART: integrity check failed (diskid/DISK-MSE421RP27UT1K, BSD)
>> GEOM_STRIPE: Disk ada2 attached to st0.
>> GEOM_STRIPE: Device stripe/st0 activated.
>> GEOM_STRIPE: Cannot add disk diskid/DISK-MSK421Y215VYBC to st0 
>> (error=17).
>>
>> # bsdlabel -wB /dev/stripe/st0
>>
>> GEOM_PART: integrity check failed (ada1, BSD)
>> GEOM_STRIPE: Cannot add disk diskid/DISK-MSK421Y215VYBC to st0 
>> (error=17).
>> GEOM_STRIPE: Cannot add disk diskid/DISK-MSE421RP27UT1K to st0 
>> (error=17).
>> GEOM_PART: integrity check failed (diskid/DISK-MSE421RP27UT1K, BSD)
>>
>> # newfs -U -j /dev/stripe/st0
>>
>>
>> I can format and mount the st0 but is giving these errorsabove.
>>
>> # uname -a
>> FreeBSD bart.test 10.0-RC1 FreeBSD 10.0-RC1 #0 r259068: Sat Dec 7 
>> 17:45:20 UTC 2013 root at snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC  
>> amd64
>>
>> []'s
>> Gondim
>>
>> _______________________________________________
>> freebsd-stable at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>> To unsubscribe, send any mail to 
>> "freebsd-stable-unsubscribe at freebsd.org"
> I noticed your messages below mention diskid which caused me some 
> trouble.
> Can you try putting kern.geom.label.disk_ident.enable=0 in 
> /boot/loader.conf
> and rebooting? 
Hi Adam,

Putting this parameterthe messages are gone.

[]'s