FreeBSD 9.1 RC1 and CAM issues with old SCSI drive

[kirk russell]

On Sat, Sep 8, 2012 at 12:29 PM, Alexander Motin <mav at freebsd.org> wrote:
> Hi.
>
> It seems like both of your problems have the same cause: device report wrong
> size of INQUIRY data, that causes failure on attempt to fetch it. With
> FreeBSD 9.0 it caused domain validation failures and so reduced transfer
> rate, on 9.1 it also causes detection failure. I am not sure why detection
> worked on 9.0, it needs some deeper code comparison, but I think it is
> mostly device problem.
>
> Could you send me output of such commands from FreeBSD 9.0:
> camcontrol cmd da0 -vEc "12 00 00 00 24 00" -i 36 - | hd
> camcontrol cmd da0 -vEc "12 00 00 00 fe 00" -i 254 - | hd
> camcontrol cmd da0 -vEc "12 00 00 01 00 00" -i 256 - | hd
>
> --
> Alexander Motin

This is running 9.0-RELEASE.

# camcontrol cmd da0 -vEc "12 00 00 00 24 00" -i 36 - | hd
00000000  00 00 02 02 fa 00 00 3e  43 4f 4d 50 41 51 50 43  |.......>COMPAQPC|
00000010  57 44 45 39 31 30 30 57  20 20 20 20 20 20 20 20  |WDE9100W        |
00000020  31 2e 30 31                                       |1.01|
00000024
# camcontrol cmd da0 -vEc "12 00 00 00 fe 00" -i 254 - | hd
00000000  00 00 02 02 fa 00 00 3e  43 4f 4d 50 41 51 50 43  |.......>COMPAQPC|
00000010  57 44 45 39 31 30 30 57  20 20 20 20 20 20 20 20  |WDE9100W        |
00000020  31 2e 30 31 32 33 30 31  57 53 37 30 32 30 33 37  |1.012301WS702037|
00000030  32 34 39 33 00 00 00 00  20 20 20 20 20 20 20 20  |2493....        |
00000040  20 20 20 20 20 20 20 20  20 20 20 20 20 20 20 20  |                |
*
00000060  57 44 45 39 31 30 30 2d  36 30 30 35 44 30 20 20  |WDE9100-6005D0  |
00000070  34 30 36 31 30 30 31 31  39 31 30 30 32 43 30 20  |4061001191002C0 |
00000080  32 34 30 38 00 00 00 00  00 00 00 00 00 00 00 00  |2408............|
00000090  00 00 00 00 4e 32 30 35  30 30 39 39 30 32 35 35  |....N20500990255|
000000a0  33 20 20 20 50 20 30 30  00 00 00 00 00 00 42 41  |3   P 00......BA|
000000b0  43 43 42 45 4b 43 31 39  39 38 30 38 32 38 57 53  |CCBEKC19980828WS|
000000c0  36 30 44 20 04 03 00 04  02 01 00 00 00 00 00 00  |60D ............|
000000d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000000f0
# camcontrol cmd da0 -vEc "12 00 00 01 00 00" -i 256 - | hd
(pass1:ahc0:0:0:0): INQUIRY. CDB: 12 0 0 1 0 0
(pass1:ahc0:0:0:0): CAM status: SCSI Status Error
(pass1:ahc0:0:0:0): SCSI status: Check Condition
(pass1:ahc0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
(pass1:ahc0:0:0:0): Command Specific Info: 0xffffffff
(pass1:ahc0:0:0:0): Command byte 3 is invalid
camcontrol: error sending command
(pass1:ahc0:0:0:0): INQUIRY. CDB: 12 0 0 1 0 0
(pass1:ahc0:0:0:0): CAM status: SCSI Status Error
(pass1:ahc0:0:0:0): SCSI status: Check Condition
(pass1:ahc0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
(pass1:ahc0:0:0:0): Command Specific Info: 0xffffffff
(pass1:ahc0:0:0:0): Command byte 3 is invalid


-- 
Kirk Russell            <kirk at ba23.org>           http://www.ba23.org/