devd problem with 9-stable

[Ronald Klop]

On Thu, 14 Jun 2012 02:41:58 +0200, Kevin Oberman <kob6558 at gmail.com>  
wrote:

> Since updating my systems to 9-Stable, I am not getting my smartcard
> reader attached when hot-plugged.
>
>> From devd.conf
> attach 50 {
>         device-name "ugen[0-9]+";
>         match "vendor" "0x0529";
>         match "product" "0x0600";
>         action "/usr/local/sbin/openct-control attach usb:529/600 usb  
> /dev/$dev$
> };
> detach 50 {
>         device-name "ugen[0-9]+";
>         match "vendor" "0x0529";
>         match "product" "0x0600";
>         action "/usr/bin/pkill -fx '/usr/local/sbin/ifdhandler -H -p  
> [a-z0-9]+ $
> };
>
> If I manually enter the "action" command, it works fine, but it fails
> when I insert the device. It worked fine under version 8. I have
> confirmed devd is seeing the device inserted just fine. the action
> just does not seem to be carried out.
>
> Any idea where I should look? I saw a couple of threads on current
> from others seeing something similar, but could find no resolution.
> I have seen a

Did you run devd with debug messages on? Options -D and -d are helpful.
If you do does devd match the right devd.conf sections and start the  
action?

Ronald.