em interfaces supermicro X9SCM-F board
Johan Hendriks
joh.hendriks at gmail.com
Tue Jun 5 16:46:57 UTC 2012
hello all.
i have a new board the supermicro X9SCM-F with the latest firmware 508.
I am having some trouble with the onboard intel nics.
It only activate one nic.
From dmesg
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xf020-0xf03f mem
0xf7800000-0xf781ffff,0xf7825000-0xf7825fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Setup of Shared code failed
device_attach: em0 attach returned 6
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7824000-0xf78243ff irq
16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xd000-0xd01f mem
0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: 00:25:90:75:c8:08
pciconf -vl
em0 at pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x15038086
rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82579V Gigabit Network Connection'
class = network
subclass = ethernet
em1 at pci0:3:0:0: class=0x020000 card=0x000015d9 chip=0x10d38086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = '82574L Gigabit Network Connection'
class = network
subclass = ethernet
I have anothe machine wich has 9.0 stable as of today, if i boot from
that disk, then it shows the above dmesg message with one difference
that it replaces em1 for em0 also.
it then looks like so
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf020-0xf03f mem
0xf7800000-0xf781ffff,0xf7825000-0xf7825fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Setup of Shared code failed
device_attach: em0 attach returned 6
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7824000-0xf78243ff irq
16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd000-0xd01f mem
0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 00:25:90:75:c8:08
So still one network card.
Full dmesg from the 9.0-STABLE install.
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #0: Tue Jun 5 13:55:38 CEST 2012
root at filer01.neuteboom.local:/usr/obj/usr/src/sys/KRNL amd64
CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3093.05-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a
Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33077051392 (31544 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mps0: <LSI SAS2008> port 0xe000-0xe0ff mem
0xf7600000-0xf7603fff,0xf7580000-0xf75bffff irq 19 at device 0.0 on pci1
mps0: Firmware: 13.00.57.00, Driver: 13.00.00.00-fbsd
mps0: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf020-0xf03f mem
0xf7800000-0xf781ffff,0xf7825000-0xf7825fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Setup of Shared code failed
device_attach: em0 attach returned 6
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7824000-0xf78243ff irq
16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd000-0xd01f mem
0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 00:25:90:75:c8:08
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7823000-0xf78233ff irq
23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem
0xf5000000-0xf5ffffff,0xf7000000-0xf7003fff,0xf6800000-0xf6ffffff irq 19
at device 3.0 on pci4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port
0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f
mem 0xf7822000-0xf78227ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
forwarding disabled, default to deny, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ses0 at mps0 bus 0 scbus0 target 8 lun 0
ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
ses0: 600.000MB/s transfers
ses0: Command Queueing enabled
ses0: SCSI-3 SES Device
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <ST3808110AS 3.AJJ> ATA-7 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 12082230 Hz quality 1000
Root mount waiting for: usbus0
ugen0.3: <Winbond Electronics Corp> at usbus0
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,
rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,
rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
regards,
Johan Hendriks
More information about the freebsd-stable
mailing list