Console options for legacy-free mini-itx server?
Andrew Reilly
areilly at bigpond.net.au
Mon Nov 15 10:20:27 UTC 2010
It's been suggested that I make the output of dmidecode (from
ports/sysutils), pciconf -lv and dmesg.boot available, to help
answer my previosu question. Since all of that output is
relatively small and I don't really have a good web site to put
it, I'll just include it, below. Hope this helps!
dmidecode:
# dmidecode 2.10
SMBIOS 2.5 present.
25 structures occupying 1318 bytes.
Table at 0x000EB240.
Handle 0x0000, DMI type 4, 35 bytes
Processor Information
Socket Designation: XU1
Type: Central Processor
Family: Other
Manufacturer: Intel(R) Corporation
ID: 52 06 02 00 FF FB EB BF
Version: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz
Voltage: 1.1 V
External Clock: 133 MHz
Max Speed: 4000 MHz
Current Speed: 2935 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0004
L2 Cache Handle: 0x0003
L3 Cache Handle: 0x0001
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0001, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 4096 kB
Maximum Size: 4096 kB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 16-way Set-associative
Handle 0x0002, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0003, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 256 kB
Maximum Size: 256 kB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0004, DMI type 7, 19 bytes
Cache Information
Socket Designation: Unknown
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Instruction
Associativity: 4-way Set-associative
Handle 0x0005, DMI type 0, 24 bytes
BIOS Information
Vendor: Intel Corp.
Version: JGIBX10J.86A.0217.2010.0120.2350
Release Date: 01/20/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 8192 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 0.0
Firmware Revision: 0.0
Handle 0x0006, DMI type 1, 27 bytes
System Information
Manufacturer:
Product Name:
Version:
Serial Number:
UUID: 9AC7F680-1607-11DF-8BC1-00270E0FB8E9
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0007, DMI type 2, 20 bytes
Base Board Information
Manufacturer: Intel Corporation
Product Name: DH57JG
Version: AAE70930-302
Serial Number: BTJG006000R9
Asset Tag: Base Board Asset Tag
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Base Board Chassis Location
Chassis Handle: 0x0008
Type: Unknown
Contained Object Handles: 0
Handle 0x0008, DMI type 3, 17 bytes
Chassis Information
Manufacturer:
Type: Unknown
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Other
Security Status: Other
OEM Information: 0x00000000
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ATX_PWR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PCIE X16 SLOT
Type: x16 <OUT OF SPEC>
Current Usage: In Use
Length: Short
Characteristics:
3.3 V is provided
Handle 0x000D, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: Intel(R) Graphics Media Accelerator HD
Handle 0x000E, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel(R) 82578DC Gigabit Network Connection
Handle 0x000F, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Device
Handle 0x0010, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
enUS
Currently Installed Language: enUS
Handle 0x0011, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0012, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0013, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x0012
Partition Width: 0
Handle 0x0014, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0012
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: J1MY
Bank Locator: CHANNEL A DIMM 0
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz
Manufacturer: 0x029E
Serial Number: 0x00000000
Asset Tag: Unknown
Part Number: 0x434D33583247313333334339202020202020
Handle 0x0015, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0012
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: J3MY
Bank Locator: CHANNEL B DIMM 0
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz
Manufacturer: 0x029E
Serial Number: 0x00000000
Asset Tag: Unknown
Part Number: 0x434D33583247313333334339202020202020
Handle 0x0016, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 16 00 01 01 02 00
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x0017, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 17 00 24 41 4D 54 01 01 01 01 01 A5 8F 02
00 00 01 00
Handle 0xFEFF, DMI type 127, 4 bytes
End Of Table
pciconf -lv:
hostb0 at pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x00408086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:0:1:0: class=0x060400 card=0x474a8086 chip=0x00418086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
vgapci0 at pci0:0:2:0: class=0x030000 card=0x00428086 chip=0x00428086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = display
subclass = VGA
none0 at pci0:0:22:0: class=0x078000 card=0x474a8086 chip=0x3b648086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = simple comms
atapci1 at pci0:0:22:2: class=0x010185 card=0x474a8086 chip=0x3b668086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = ATA
none1 at pci0:0:22:3: class=0x070002 card=0x474a8086 chip=0x3b678086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = simple comms
subclass = UART
em0 at pci0:0:25:0: class=0x020000 card=0x00358086 chip=0x10f08086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
ehci0 at pci0:0:26:0: class=0x0c0320 card=0x474a8086 chip=0x3b3c8086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
none2 at pci0:0:27:0: class=0x040300 card=0x00358086 chip=0x3b568086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = multimedia
subclass = HDA
pcib2 at pci0:0:28:0: class=0x060400 card=0x474a8086 chip=0x3b428086 rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib3 at pci0:0:28:4: class=0x060400 card=0x474a8086 chip=0x3b4a8086 rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:0:28:6: class=0x060400 card=0x474a8086 chip=0x3b4e8086 rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
ehci1 at pci0:0:29:0: class=0x0c0320 card=0x474a8086 chip=0x3b348086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
pcib5 at pci0:0:30:0: class=0x060401 card=0x474a8086 chip=0x244e8086 rev=0xa6 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:0:31:0: class=0x060100 card=0x474a8086 chip=0x3b088086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-ISA
atapci2 at pci0:0:31:2: class=0x01018f card=0x474a8086 chip=0x3b208086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'IBEX SATA Controller'
class = mass storage
subclass = ATA
none3 at pci0:0:31:3: class=0x0c0500 card=0x474a8086 chip=0x3b308086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = SMBus
atapci3 at pci0:0:31:5: class=0x010185 card=0x474a8086 chip=0x3b268086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'IBEX SATA Controller'
class = mass storage
subclass = ATA
atapci0 at pci0:1:0:0: class=0x010400 card=0x71321095 chip=0x31321095 rev=0x01 hdr=0x00
vendor = 'Silicon Image Inc (Was: CMD Technology Inc)'
device = 'PCI Express (1x) to 2 Port SATA300 (SiI 3132)'
class = mass storage
subclass = RAID
/var/run/dmesg.boot:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE #7: Mon Nov 15 15:09:08 EST 2010
root at johnny.reilly.home:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz (2933.46-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x20652 Family = 6 Model = 25 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 3894886400 (3714 MB)
ACPI APIC Table: <INTEL DH57JG >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 4
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL DH57JG> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci0: <SiI 3132 SATA300 controller> port 0x1000-0x107f mem 0xf0404000-0xf040407f,0xf0400000-0xf0403fff irq 16 at device 0.0 on pci1
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
vgapci0: <VGA-compatible display> port 0x20c8-0x20cf mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel Ironlake (D) SVGA controller> on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
pci0: <simple comms> at device 22.0 (no driver attached)
atapci1: <Intel ATA controller> port 0x20c0-0x20c7,0x20e4-0x20e7,0x20b8-0x20bf,0x20e0-0x20e3,0x2080-0x208f irq 18 at device 22.2 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pci0: <simple comms, UART> at device 22.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x2020-0x203f mem 0xf0500000-0xf051ffff,0xf0524000-0xf0524fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:27:0e:0f:b8:e9
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xf0526400-0xf05267ff irq 16 at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xf0526000-0xf05263ff irq 23 at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel 5 Series/3400 Series PCH SATA300 controller> port 0x20a8-0x20af,0x20dc-0x20df,0x20a0-0x20a7,0x20d8-0x20db,0x2070-0x207f,0x2060-0x206f irq 19 at device 31.2 on pci0
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci3: <Intel 5 Series/3400 Series PCH SATA300 controller> port 0x2098-0x209f,0x20d4-0x20d7,0x2090-0x2097,0x20d0-0x20d3,0x2050-0x205f,0x2040-0x204f irq 19 at device 31.5 on pci0
atapci3: [ITHREAD]
ata8: <ATA channel 0> on atapci3
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci3
ata9: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
device_attach: acpi_perf1 attach returned 6
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
device_attach: acpi_perf1 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 16
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ad4: 953869MB <Seagate ST31000340NS SN06> at ata2-master UDMA100 SATA 3Gb/s
ad6: 953869MB <Seagate ST31000340NS SN06> at ata3-master UDMA100 SATA 3Gb/s
ad12: 7815MB <SanDisk SDCFX4-8192 HDX 4.28> at ata6-master UDMA66 SATA 1.5Gb/s
ad13: 953869MB <Seagate ST31000340NS SN06> at ata6-slave UDMA100 SATA 3Gb/s
ad14: 953869MB <Seagate ST31000340NS SN06> at ata7-master UDMA100 SATA 3Gb/s
ad18: 1907729MB <LaCie d2Next-Quadra JKAOA3EA> at ata9-master UDMA100 SATA 3Gb/s
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus1 usbus0
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/gpt/root
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 4
ZFS storage pool version 15
More information about the freebsd-stable
mailing list