if_re is broken on RELENG_7 ?

[Sergey V. Dyatko]

В Thu, 2 Oct 2008 01:08:27 -0700
Jeremy Chadwick <koitsu at FreeBSD.org> wrote:

> On Thu, Oct 02, 2008 at 10:26:00AM +0300, Sergey V. Dyatko wrote:
> > Hi list, 
> > I have ASUS a6m laptop with integrated RTL8168/8111 PCI-E Gigabit
> > Ethernet NIC, long time ago (7.0-CURRENT - 7.0-prerelease) I used
> > it. Than I started to enjoy BCM43XX wi-fi adapter and now I recently
> > decided to revert to the use of realtek adapter. But it doesn't
> > work. I'm just not running a network card or at all does not work?
> > 
> > some additional information: 
> > ifconfig shows such information, regardless of whether the cable is
> > connected:
> > 
> > %ifconfig re0 
> > re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> >         options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
> >         ether 00:1a:92:ca:b3:bc
> >         media: Ethernet autoselect (10baseT/UTP <half-duplex>)
> >         status: no carrier
> > 
> > [tiger at notebook]~%pciconf -lv | grep re0 -A 4
> > re0 at pci0:2:0:0: class=0x020000 card=0x11f51043 chip=0x816810ec
> > rev=0x01 hdr=0x00 vendor     = 'Realtek Semiconductor'
> >     device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
> >     class      = network
> >     subclass   = ethernet
> > dmesg output: http://tiger.byfly.by/files/dmesg.boot
> > kernel config: http://tiger.byfly.by/files/tiger-asus-a6m
> > 
> > p.s.: Excuse me for my English :)
> 
> Looks like link isn't being established, and autoselect is resorting
> to 10BT/half.
> 
> Can you provide pciconf -lv output?
> 

sure, http://tiger.byfly.by/files/pciconf.txt


> CC'ing PYUN Yong-Hyeon (surname Pyun), who helps maintain this driver.
> He might have some patches for you.
> 




-- 
wbr, tiger