pf broken in 7.0-BETA1 ?
Ermal Luçi
ermal.luci at gmail.com
Sun Oct 28 12:39:34 PDT 2007
Try using
pass out on $ext_if proto tcp from any to any tos 0x10 no keep state queue ssh
and it should work as you expect!
On 10/28/07, Andrew Birukov <amb at amb.kiev.ua> wrote:
>
> pf.conf:
> ---------------------------------------------------------------
> ext_if="xl0"
>
> altq on $ext_if priq bandwidth 520Kb queue { ssh, traf }
> queue ssh priority 1
> queue traf priority 15 priq(default)
>
> pass in all
> pass out all
>
> pass out on $ext_if proto tcp from any to any tos 0x10 queue ssh
> -----------------------------------------------------------------
>
> I connected to remote host by ssh.
> In tcpdump i see many packets witch tos 0x10.
>
> 12:54:46.732928 IP (tos 0x10, ttl 64, id 12486, offset 0, flags [DF],
> proto TCP (6), length 52) 10.15.25.2.56587 > 194.0.91.110.22: ., cksum
> 0x35d5 (correct), 1919:1919(0) ack 2832 win 8181 <nop,nop,timestamp
> 8630585 535444648>
> 12:54:46.746958 IP (tos 0x10, ttl 64, id 12487, offset 0, flags [DF],
> proto TCP (6), length 100) 10.15.25.2.56587 > 194.0.91.110.22: P
> 1919:1967(48) ack 2832 win 8195 <nop,nop,timestamp 8630598 535444648>
> 12:54:46.900186 IP (tos 0x10, ttl 64, id 12488, offset 0, flags [DF],
> proto TCP (6), length 52) 10.15.25.2.56587 > 194.0.91.110.22: ., cksum
> 0x33ec (correct), 1967:1967(0) ack 2944 win 8181 <nop,nop,timestamp
> 8630746 535444816>
> 12:54:46.915079 IP (tos 0x10, ttl 64, id 12489, offset 0, flags [DF],
> proto TCP (6), length 100) 10.15.25.2.56587 > 194.0.91.110.22: P
> 1967:2015(48) ack 2944 win 8195 <nop,nop,timestamp 8630760 535444816>
>
> tcpdump confirms that the outgoing ssh data packets have tos 0x10, but
> the majority of the packets are still going to the default "traf" queue.
>
> queue ssh on xl0
> [ pkts: 0 bytes: 0 dropped pkts: 0 bytes:
> 0 ]
> [ qlength: 0/ 50 ]
> [ measured: 0.0 packets/s, 0 b/s ]
> queue traf on xl0 priority 15 priq( default )
> [ pkts: 5059 bytes: 1130390 dropped pkts: 69 bytes:
> 80689 ]
> [ qlength: 0/ 50 ]
> [ measured: 3.9 packets/s, 2.15Kb/s ]
>
>
> This problem is affected 7.0 only.
> pf rools witch tos in FreeBSD-6.2 (previous pf version) work properly.
>
> My configuration:
> # uname -a
> FreeBSD amb.kiev.ua 7.0-BETA1 FreeBSD 7.0-BETA1 #1: Sun Oct 28 10:08:13
> ADT 2007 root at amb.kiev.ua:/usr/obj/usr/src/sys/AMB.7.0 i386
>
> dmesg output and kernel config file are attached to this letter.
>
> Last time I cvsupped RELENG_7 and reinstall world in this morning.
>
> --
> Andrew Biriukov
> amb at amb.kiev.ua
>
>
> #
> # GENERIC -- Generic kernel configuration file for FreeBSD/i386
> #
> # For more information on this file, please read the handbook section on
> # Kernel Configuration Files:
> #
> # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
> #
> # The handbook is also available locally in /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise always see the
> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed explanations of the
> # device lines is also present in the ../../conf/NOTES and NOTES files.
> # If you are in doubt as to the purpose or necessity of a line, check first
> # in NOTES.
> #
> # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.474.2.1 2007/10/11 06:20:26 kensmith Exp $
>
> #cpu I486_CPU
> #cpu I586_CPU
> cpu I686_CPU
> ident AMB
>
> # To statically compile in device wiring instead of /boot/device.hints
> #hints "GENERIC.hints" # Default places to look for devices.
>
> makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
>
> options SCHED_4BSD # 4BSD scheduler
> #options SCHED_ULE
> options PREEMPTION # Enable kernel thread preemption
> options INET # InterNETworking
> #options INET6 # IPv6 communications protocols
> #options SCTP # Stream Control Transmission Protocol
> options FFS # Berkeley Fast Filesystem
> options SOFTUPDATES # Enable FFS soft updates support
> options UFS_ACL # Support for access control lists
> options UFS_DIRHASH # Improve performance on big directories
> options UFS_GJOURNAL # Enable gjournal-based UFS journaling
> options MD_ROOT # MD is a potential root device
> #options NFSCLIENT # Network Filesystem Client
> #options NFSSERVER # Network Filesystem Server
> #options NFS_ROOT # NFS usable as /, requires NFSCLIENT
> #options MSDOSFS # MSDOS Filesystem
> #options CD9660 # ISO 9660 Filesystem
> options PROCFS # Process filesystem (requires PSEUDOFS)
> options PSEUDOFS # Pseudo-filesystem framework
> options GEOM_PART_GPT # GUID Partition Tables.
> options GEOM_LABEL # Provides labelization
> options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
> options COMPAT_FREEBSD4 # Compatible with FreeBSD4
> options COMPAT_FREEBSD5 # Compatible with FreeBSD5
> options COMPAT_FREEBSD6 # Compatible with FreeBSD6
> #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
> options KTRACE # ktrace(1) support
> options SYSVSHM # SYSV-style shared memory
> options SYSVMSG # SYSV-style message queues
> options SYSVSEM # SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options ADAPTIVE_GIANT # Giant mutex is adaptive.
> options STOP_NMI # Stop CPUS using NMI instead of IPI
> options AUDIT # Security event auditing
>
> #options IPFIREWALL
> #options IPFIREWALL_DEFAULT_TO_ACCEPT
> #options IPFIREWALL_FORWARD
> #options DUMMYNET
>
> #options IPFILTER
> #options IPFILTER_LOG
>
> #options ACCEPT_FILTER_DATA
> #options ACCEPT_FILTER_HTTP
>
> options ALTQ
> options ALTQ_CBQ
> options ALTQ_RED
> options ALTQ_RIO
> options ALTQ_HFSC
> options ALTQ_CDNR
> options ALTQ_PRIQ
> options ALTQ_NOPCC
> options ALTQ_DEBUG
>
>
> #options NETGRAPH
> #options NETGRAPH_SPPP
> #options NETGRAPH_PPP
> #options NETGRAPH_PPPOE
> #options NETGRAPH_PPTPGRE
>
> options DEVICE_POLLING
> device atapicam
>
> # To make an SMP kernel, the next two lines are needed
> options SMP # Symmetric MultiProcessor Kernel
> device apic # I/O APIC
>
> # CPU frequency control
> device cpufreq
>
> # Bus support.
> #device eisa
> device pci
>
> # Floppy drives
> device fdc
>
> # ATA and ATAPI devices
> device ata
> device atadisk # ATA disk drives
> #device ataraid # ATA RAID drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> #device atapist # ATAPI tape drives
> options ATA_STATIC_ID # Static device numbering
>
> # SCSI Controllers
> #device ahb # EISA AHA1742 family
> #device ahc # AHA2940 and onboard AIC7xxx devices
> #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~128k to driver.
> #device ahd # AHA39320/29320 and onboard AIC79xx devices
> #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~215k to driver.
> #device amd # AMD 53C974 (Tekram DC-390(T))
> #device hptiop # Highpoint RocketRaid 3xxx series
> #device isp # Qlogic family
> #device ispfw # Firmware for QLogic HBAs- normally a module
> #device mpt # LSI-Logic MPT-Fusion
> #device ncr # NCR/Symbios Logic
> #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
> #device trm # Tekram DC395U/UW/F DC315U adapters
>
> #device adv # Advansys SCSI adapters
> #device adw # Advansys wide SCSI adapters
> #device aha # Adaptec 154x SCSI adapters
> #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
> #device bt # Buslogic/Mylex MultiMaster SCSI adapters
>
> #device ncv # NCR 53C500
> #device nsp # Workbit Ninja SCSI-3
> #device stg # TMC 18C30/18C50
>
> # SCSI peripherals
> device scbus # SCSI bus (required for SCSI)
> #device ch # SCSI media changers
> device da # Direct Access (disks)
> #device sa # Sequential Access (tape etc)
> device cd # CD
> device pass # Passthrough device (direct SCSI access)
> #device ses # SCSI Environmental Services (and SAF-TE)
>
> # RAID controllers interfaced to the SCSI subsystem
> #device amr # AMI MegaRAID
> #device arcmsr # Areca SATA II RAID
> #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
> #device ciss # Compaq Smart RAID 5*
> #device dpt # DPT Smartcache III, IV - See NOTES for options
> #device hptmv # Highpoint RocketRAID 182x
> #device rr232x # Highpoint RocketRAID 232x
> #device iir # Intel Integrated RAID
> #device ips # IBM (Adaptec) ServeRAID
> #device mly # Mylex AcceleRAID/eXtremeRAID
> #device twa # 3ware 9000 series PATA/SATA RAID
>
> # RAID controllers
> #device aac # Adaptec FSA RAID
> #device aacp # SCSI passthrough for aac (requires CAM)
> #device ida # Compaq Smart RAID
> #device mfi # LSI MegaRAID SAS
> #device mlx # Mylex DAC960 family
> #device pst # Promise Supertrak SX6000
> #device twe # 3ware ATA RAID
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> #device psm # PS/2 mouse
>
> device kbdmux # keyboard multiplexer
>
> device vga # VGA video card driver
>
> device splash # Splash screen and screen saver support
>
> # syscons is the default console driver, resembling an SCO console
> device sc
>
> device agp # support several AGP chipsets
>
> # Power management support (see NOTES for more options)
> #device apm
> # Add suspend/resume support for the i8254.
> #device pmtimer
>
> # PCCARD (PCMCIA) support
> # PCMCIA and cardbus bridge support
> #device cbb # cardbus (yenta) bridge
> #device pccard # PC Card (16-bit) bus
> #device cardbus # CardBus (32-bit) bus
>
> # Serial (COM) ports
> device sio # 8250, 16[45]50 based serial ports
> device uart # Generic UART driver
>
> # Parallel port
> #device ppc
> #device ppbus # Parallel port bus (required)
> #device lpt # Printer
> #device plip # TCP/IP over parallel
> #device ppi # Parallel port interface device
> #device vpo # Requires scbus and da
>
> # If you've got a "dumb" serial or parallel PCI card that is
> # supported by the puc(4) glue driver, uncomment the following
> # line to enable it (connects to sio, uart and/or ppc drivers):
> #device puc
>
> # PCI Ethernet NICs.
> device de # DEC/Intel DC21x4x (``Tulip'')
> device em # Intel PRO/1000 adapter Gigabit Ethernet Card
> device ixgb # Intel PRO/10GbE Ethernet Card
> device le # AMD Am7900 LANCE and Am79C9xx PCnet
> device txp # 3Com 3cR990 (``Typhoon'')
> device vx # 3Com 3c590, 3c595 (``Vortex'')
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
> device miibus # MII bus support
> #device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
> #device bfe # Broadcom BCM440x 10/100 Ethernet
> #device bge # Broadcom BCM570xx Gigabit Ethernet
> #device dc # DEC/Intel 21143 and various workalikes
> #device fxp # Intel EtherExpress PRO/100B (82557, 82558)
> #device lge # Level 1 LXT1001 gigabit Ethernet
> #device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
> #device nfe # nVidia nForce MCP on-board Ethernet
> #device nge # NatSemi DP83820 gigabit Ethernet
> #device nve # nVidia nForce MCP on-board Ethernet Networking
> #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
> device re # RealTek 8139C+/8169/8169S/8110S
> #device rl # RealTek 8129/8139
> #device sf # Adaptec AIC-6915 (``Starfire'')
> #device sis # Silicon Integrated Systems SiS 900/SiS 7016
> #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
> #device ste # Sundance ST201 (D-Link DFE-550TX)
> #device stge # Sundance/Tamarack TC9021 gigabit Ethernet
> #device ti # Alteon Networks Tigon I/II gigabit Ethernet
> #device tl # Texas Instruments ThunderLAN
> #device tx # SMC EtherPower II (83c170 ``EPIC'')
> #device vge # VIA VT612x gigabit Ethernet
> #device vr # VIA Rhine, Rhine II
> #device wb # Winbond W89C840F
> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
> # ISA Ethernet NICs. pccard NICs included.
> #device cs # Crystal Semiconductor CS89x0 NIC
> # 'device ed' requires 'device miibus'
> #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
> #device ex # Intel EtherExpress Pro/10 and Pro/10+
> #device ep # Etherlink III based cards
> #device fe # Fujitsu MB8696x based cards
> #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
> #device sn # SMC's 9000 series of Ethernet chips
> #device xe # Xircom pccard Ethernet
>
> # Wireless NIC cards
> #device wlan # 802.11 support
> #device wlan_wep # 802.11 WEP support
> #device wlan_ccmp # 802.11 CCMP support
> #device wlan_tkip # 802.11 TKIP support
> #device wlan_amrr # AMRR transmit rate control algorithm
> #device wlan_scan_ap # 802.11 AP mode scanning
> #device wlan_scan_sta # 802.11 STA mode scanning
> #device an # Aironet 4500/4800 802.11 wireless NICs.
> #device ath # Atheros pci/cardbus NIC's
> #device ath_hal # Atheros HAL (Hardware Access Layer)
> #device ath_rate_sample # SampleRate tx rate control for ath
> #device awi # BayStack 660 and others
> #device ral # Ralink Technology RT2500 wireless NICs.
> #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
> #device wl # Older non 802.11 Wavelan wireless NIC.
>
> # Pseudo devices.
> device loop # Network loopback
> device random # Entropy device
> device ether # Ethernet support
> #device sl # Kernel SLIP
> #device ppp # Kernel PPP
> device tun # Packet tunnel.
> device pty # Pseudo-ttys (telnet etc)
> device md # Memory "disks"
> #device gif # IPv6 and IPv4 tunneling
> #device faith # IPv6-to-IPv4 relaying (translation)
> #device firmware # firmware assist module
>
> # The `bpf' device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> # Note that 'bpf' is required for DHCP.
> device bpf # Berkeley packet filter
>
> # USB support
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> device ehci # EHCI PCI->USB interface (USB 2.0)
> device usb # USB Bus (required)
> #device udbp # USB Double Bulk Pipe devices
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> #device ulpt # Printer
> device umass # Disks/Mass storage - Requires scbus and da
> device ums # Mouse
> #device ural # Ralink Technology RT2500USB wireless NICs
> #device rum # Ralink Technology RT2501USB wireless NICs
> #device urio # Diamond Rio 500 MP3 player
> #device uscanner # Scanners
> # USB Ethernet, requires miibus
> device aue # ADMtek USB Ethernet
> device axe # ASIX Electronics USB Ethernet
> device cdce # Generic USB over Ethernet
> device cue # CATC USB Ethernet
> device kue # Kawasaki LSI USB Ethernet
> device rue # RealTek RTL8150 USB Ethernet
>
> # FireWire support
> #device firewire # FireWire bus code
> #device sbp # SCSI over FireWire (Requires scbus and da)
> #device fwe # Ethernet over FireWire (non-standard!)
> #device fwip # IP over FireWire (RFC 2734,3146)
> #device dcons # Dumb console driver
> #device dcons_crom # Configuration ROM for dcons
>
> device sound
> device snd_hda
> device coretemp
>
>
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.0-BETA1 #1: Sun Oct 28 10:08:13 ADT 2007
> root at amb.kiev.ua:/usr/obj/usr/src/sys/AMB.7.0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz (1805.49-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x6f2 Stepping = 2
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
> AMD Features=0x20100000<NX,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 2
> real memory = 2147024896 (2047 MB)
> avail memory = 2087424000 (1990 MB)
> ACPI APIC Table: <MSTEST OEMAPIC >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <MSTEST OEMXSDT> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 7ff00000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> cpu0: <ACPI CPU> on acpi0
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 928092806000928
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 928092806000928
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> nvidia0: <GeForce 7100 GS> mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
> nvidia0: [GIANT-LOCKED]
> nvidia0: [ITHREAD]
> uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 26.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 17 at device 26.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff irq 18 at device 26.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb2: waiting for BIOS to give up control
> usb2: EHCI version 1.0
> usb2: companion controllers, 2 ports each: usb0 usb1
> usb2: <EHCI (generic) USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
> uhub2: 4 ports with 4 removable, self powered
> pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0
> pcm0: [ITHREAD]
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci4: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
> pci3: <ACPI PCI bus> on pcib3
> re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfe9ff000-0xfe9fffff irq 19 at device 0.0 on pci3
> re0: Using 2 MSI messages
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S media interface> PHY 1 on miibus0
> rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> re0: Ethernet address: 00:18:f3:74:54:de
> re0: [FILTER]
> re0: [FILTER]
> pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci2: <ACPI PCI bus> on pcib4
> atapci0: <JMicron JMB363 SATA300 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2
> atapci0: [ITHREAD]
> atapci0: AHCI Version 01.00 controller with 2 ports detected
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: [ITHREAD]
> uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at device 29.0 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb3: <UHCI (generic) USB controller> on uhci2
> usb3: USB revision 1.0
> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at device 29.1 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb4: <UHCI (generic) USB controller> on uhci3
> usb4: USB revision 1.0
> uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub4: 2 ports with 2 removable, self powered
> uhci4: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at device 29.2 on pci0
> uhci4: [GIANT-LOCKED]
> uhci4: [ITHREAD]
> usb5: <UHCI (generic) USB controller> on uhci4
> usb5: USB revision 1.0
> uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
> uhub5: 2 ports with 2 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff000-0xfebff3ff irq 23 at device 29.7 on pci0
> ehci1: [GIANT-LOCKED]
> ehci1: [ITHREAD]
> usb6: EHCI version 1.0
> usb6: companion controllers, 2 ports each: usb3 usb4 usb5
> usb6: <EHCI (generic) USB 2.0 controller> on ehci1
> usb6: USB revision 2.0
> uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
> uhub6: 6 ports with 6 removable, self powered
> pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xfeaffc00-0xfeaffc7f irq 23 at device 2.0 on pci5
> miibus1: <MII bus> on xl0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus1
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> xl0: Ethernet address: 00:01:03:ba:e0:71
> xl0: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
> atapci1: [ITHREAD]
> atapci1: AHCI Version 01.10 controller with 4 ports detected
> ata5: <ATA channel 0> on atapci1
> ata5: [ITHREAD]
> ata6: <ATA channel 1> on atapci1
> ata6: [ITHREAD]
> ata7: <ATA channel 2> on atapci1
> ata7: port not implemented
> ata7: [ITHREAD]
> ata8: <ATA channel 3> on atapci1
> ata8: port not implemented
> ata8: [ITHREAD]
> ata9: <ATA channel 4> on atapci1
> ata9: [ITHREAD]
> ata10: <ATA channel 5> on atapci1
> ata10: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio0: [FILTER]
> fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FILTER]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> orm0: <ISA Option ROM> at iomem 0xd2000-0xd27ff pnpid ORM0000 on isa0
> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata0: [ITHREAD]
> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> ata1: [ITHREAD]
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> uhub7: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on uhub4
> uhub7: 4 ports with 4 removable, self powered
> ukbd0: <Microsft Microsoft Wireless Desktop Receiver 3.1, class 0/0, rev 2.00/0.02, addr 3> on uhub7
> kbd2 at ukbd0
> uhid0: <Microsft Microsoft Wireless Desktop Receiver 3.1, class 0/0, rev 2.00/0.02, addr 3> on uhub7
> ums0: <Microsoft Microsoft Wireless Optical Mouse\M-. 1.00, class 0/0, rev 2.00/0.07, addr 4> on uhub7
> ums0: 5 buttons and Z dir and a TILT dir.
> uhid1: <No brand SP02-A1, class 0/0, rev 1.10/1.00, addr 5> on uhub7
> uhid2: <No brand SP02-A1, class 0/0, rev 1.10/1.00, addr 5> on uhub7
> uhid2: unexpected endpoint
> device_attach: uhid2 attach returned 6
> Timecounters tick every 1.000 msec
> acd0: DVDR <HL-DT-ST DVDRAM GSA-H10N/JL12> at ata4-slave UDMA33
> ad10: 305245MB <Seagate ST3320620AS 3.AAK> at ata5-master SATA300
> ad12: 381554MB <Seagate ST3400832AS 3.06> at ata6-master SATA150
> pcm0: <HDA Codec: Analog Devices AD1988>
> pcm0: <HDA Driver Revision: 20071020_0048>
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
> SMP: AP CPU #1 Launched!
> cd0 at ata4 bus 0 target 1 lun 0
> cd0: <HL-DT-ST DVDRAM GSA-H10N JL12> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> Trying to mount root from ufs:/dev/ad10s1a
> WARNING: ZFS is considered to be an experimental feature in FreeBSD.
> ZFS filesystem version 6
> ZFS storage pool version 6
> re0: link state changed to UP
> altq: emulate 256000000Hz cpu clock
> xl0: promiscuous mode enabled
> xl0: promiscuous mode disabled
> xl0: promiscuous mode enabled
> xl0: promiscuous mode disabled
> xl0: promiscuous mode enabled
> xl0: promiscuous mode disabled
> xl0: promiscuous mode enabled
> xl0: promiscuous mode disabled
>
>
> _______________________________________________
> freebsd-pf at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-pf
> To unsubscribe, send any mail to "freebsd-pf-unsubscribe at freebsd.org"
>
>
More information about the freebsd-stable
mailing list