Realtek eth isn't detected in Intel DG31PR mobo
Abdullah Ibn Hamad Al-Marri
almarrie at gmail.com
Wed Oct 10 07:08:16 PDT 2007
On 10/10/07, Pyun YongHyeon <pyunyh at gmail.com> wrote:
> On Wed, Oct 10, 2007 at 04:46:50AM +0300, Abdullah Ibn Hamad Al-Marri wrote:
> > Hello Guys,
> >
> > Maybe this is in HEAD? I'm not sure.
> >
> > intel says "Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the
> > Realtek* RTL8111-GR Gigabit Ethernet Controller"
> >
> > Copyright (c) 1992-2007 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > The Regents of the University of California. All rights reserved.
> > FreeBSD is a registered trademark of The FreeBSD Foundation.
> > FreeBSD 6.2-STABLE #0: Sat Sep 8 03:21:29 AST 2007
> > root at web:/usr/obj/usr/src/sys/WEB
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.62-MHz 686-class CPU)
> > Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
> > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,<b6>,EST,TM2,<b9>,CX16,<b14>,<b15>>
> > AMD Features=0x20100000<NX,LM>
> > AMD Features2=0x1<LAHF>
> > Cores per package: 2
> > real memory = 3210739712 (3062 MB)
> > avail memory = 3143385088 (2997 MB)
> > ACPI APIC Table: <INTEL DG31PR>
> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > cpu0 (BSP): APIC ID: 0
> > cpu1 (AP): APIC ID: 1
> > ioapic0 <Version 2.0> irqs 0-23 on motherboard
> > acpi0: <INTEL> on motherboard
> > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> > Timecounter "HPET" frequency 14318180 Hz quality 2000
> > acpi0: Power Button (fixed)
> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> > cpu0: <ACPI CPU> on acpi0
> > cpu1: <ACPI CPU> on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> > pci1: <ACPI PCI bus> on pcib1
> > pci0: <display, VGA> at device 2.0 (no driver attached)
> > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> > pci2: <ACPI PCI bus> on pcib2
> > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> > pci3: <ACPI PCI bus> on pcib3
> > rl0: <Realtek RTL8168B PCI-E Gigabit Ethernet Adapter> port
> > 0xc000-0xc0ff mem 0xd0020000-0xd0020fff irq 17 at device 0.0 on pci3
> > rl0: [GIANT-LOCKED]
> > version:1.73
> > rl0: Ethernet address: 00:19:d1:a7:a4:72
> > rl0: Ethernet address: 00:19:d1:a7:a4:72
> > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> > pci4: <ACPI PCI bus> on pcib4
> > isab0: <PCI-ISA bridge> at device 31.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel ICH7 SATA300 controller> port
> > 0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f
> > irq 17 at device 31.2 on pci0
> > ata2: <ATA channel 0> on atapci0
> > ata3: <ATA channel 1> on atapci0
> > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> > acpi_button0: <Sleep Button> on acpi0
> > acpi_button1: <Power Button> on acpi0
> > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > atkbd0: [GIANT-LOCKED]
> > ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> > ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> > Timecounters tick every 1.000 msec
> > ipfw2 initialized, divert loadable, rule-based forwarding disabled,
> > default to accept, logging limited to 10000 packets/entry by default
> > ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
> > ad6: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata3-master SATA150
> > SMP: AP CPU #1 Launched!
> > Trying to mount root from ufs:/dev/ad4s1a
> >
> > rl0 at pci3:0:0: class=0x020000 card=0xd6088086 chip=0x816810ec rev=0x01 hdr=0x00
> > vendor = 'Realtek Semiconductor'
> > class = network
> > subclass = ethernet
> >
> > So I used Realtek driver to get it working.
> >
> > =================================================================================
> > = Realtek 8139C/8139C+/8169S/8169SB/8169SC/8168B/8101E Driver for
> > FreeBSD v4.x/5.x/6.0 =
> > =================================================================================
> >
> > shouldn't be re0 instead of rl0?
> >
> > Could someone please look into it, Pyun?
>
> Try attached patch.
> I've touched rl(4) too because rl(4) should not attach to
> unsupported hardwares.
>
> --
> Regards,
> Pyun YongHyeon
>
>
Hello Pyun,
Thank you for the patch.
FreeBSD didn't know it or detected it as "rl0" too, it got rl0 because
I used realtek driver from their site.
So would this patch make FreeBSD detect it without any need for the
driver from realtek site?
--
Regards,
-Abdullah Ibn Hamad Al-Marri
Arab Portal
http://www.WeArab.Net/
More information about the freebsd-stable
mailing list